Championing the
Changemakers

Welcome to the quiz portion of Pest Prevention: Steps Designers Can Take!

Learning Objectives
Upon completing this course, participants will be able to:


Recount the problems and challenges that various pests present to the green building industry, such as health risks to occupants and structural issues that decrease building... Read more

Jake Gehrung
 

If I'm remembering correctly, someone at the summer summit mentioned working on / or being familiar with the Berkeley CA gas ban. A town here in MA is also considering a ban and wanted to get some feedback from Berkeley.

If you have a moment and are working in the IAQ arena, please consider filling out this survey, and you could also win an AirGradient ONE monitor. (Check my review video here: https://www.youtube.com/watch?v=NpqYOWLzv7o) 

https://forms.gle/ytLcq2dvtGrD2UZY7

I also have access to the results and will happily share the data whenever... Read more

I'm in search of anyone who's done a LEED ACP Pilot Credit. It's unclear to me whether using one of these pathways replaces the way the base prereq or credit would function in the rating system being used by a project seeking certification or if it's a strategy to achieve Innovation in Design credits only. The documentation I've been able to... Read more

Is this EDI, or JEDI? (Justice, Equity...)

Notes (attached) and Guiding Questions:

Equity, Diversity, And Inclusion In Our Firms

What are the barriers and what’s working to cut through them?

The process is so super slow... how to to celebrate our small achievements?

How are we fostering inclusion and... Read more

Welcome to the quiz portion of Building Re-Entry with Arc

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the similarities and differences between LEED v4.1 O+M performance metrics and the Arc Re-Entry program.

2.  Understand how Arc Re-Entry contributes to an iterative re-... Read more

I give you... the content-ready site. The editors should be able to start adding Best Practice content.

Development site: 
https://live-bituser.pantheonsite.io/

Instructions (with tutorial videos):
https://docs.google.com/document/d/1EUIzitkW0CczFQo8V2q3gVDVO4Juk4EI9iv8...

I created accounts for all the editors... Read more

Tuesday, June 20th 2:00pm Eastern (11am Pacific)

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

Hi all,

Jacobs is looking to hire specifically for sustainability needs! We have a current job posting for a Senior Sustainability Specialist now up, and anticipate a similar posting soon for a mid-level person as well. Location for these would be in the Mountain or Pacific time zones, remote work is fine; other future anticipated posts... Read more

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

Hi all,

Due to the eclipse, Nadav and I will be out on our usual call day, April 9th, and we anticipate others may as well. We will be moving the call to Tuesday April 16th at the usual time (2-3pm ET). For this meeting, we'll be holding a whiteboard session about MEP2040, the development of plans to achieve it, and tactics to getting... Read more

Welcome to the quiz portion of Choosing Insulation: High-Performance Wall Assemblies – Unit 3.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Describe key environmental and performance factors for insulation materials.
2. Recount bottom-line insulation material... Read more

Team,

See this paper regarding outside air vs. filtration.

https://www.sciencedirect.com/science/article/pii/S0360132313002515

MERV-13 is a good way to get most benefits without a huge cost.

Best,
Luke Leung

This question came to me via our mutual friend Josh Jacobs, but while interesting it's a bit out of my range of expertise... 

In short, a critical materials assessment specifically focused on airbourne byproducts from a manufacturing process that would be first-of-its-kind in the U.S. 

Required Emissions Details: Link to the 48C... Read more