On LEEDuser we divide checklists into multiple project phases. Specifically:

How many of these phases are relevant for BIT best practices?

Note that we also... Read more

I wanted to let you all know about this Built Environment Plus Roundtable coming up on Thursday afternoon 3:00 est. We will be having a discussion around the IRA and how to implement the incentives on projects and help our clients understnad what it means for them. This is an informal setting where people can ask questions or share experiences... Read more

Happy Friday Everyone!

Hoping to add a bit of excitement to the end of your week: 

Here is the Sustainable Construction Leaders 2020 Summit Report.

Enjoy!

RoseAnn for Candace, Nadav, and the BuildingGreen team

Has anyone used a commercial heat pump water heater for a large protect?  I have found a few manufacturers for this technology, but want to make sure this is a viable and cost approach to electrical eliminate gas on a path to all electric.

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

Now that you’ve read “The Urgency of Embodied Carbon,” sign up for BuildingGreen Premium to take the quiz and get continuing education credits with AIA and GBCI.

BuildingGreen Premium includes access to our vast CEU library, including Spotlight Reports, feature articles, and webcasts. We’... Read more

Welcome to the quiz portion of Go with the Flows: The Promise and Peril of Hygrothermal Modeling

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe the true role of hygrothermal modeling in design.
2. Name four instances in which to consider using hygrothermal modeling... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Hi all,

I'm curious if anyone has insight as to the "New Federal Building Performance Standards" that were announced in May of 2021 and then referenced again when E.O. 14057 came out. The memorandum for heads of agencies that was sent out with E.O. 14057 said that the CEQ would issue these standards, but I can't find a commitment to when... Read more

Peter Yost (at https://building-wright.com/ )  is available to provide building science expertise, trainings, public speaking, building investigations, and more. Learn more

Hi Gurus,

It seems odd to think about leases now, during a time when most business are giving up leases or reducing their footprints, but there are still leases going on! Please share this link to any clients of yours who might be interested and sign up yourself if you want to advocate to your clients to consider these leases!

... Read more

Hello! 

We have several projects that are either pending ILFI Zero Carbon certification or the owner is planning to purchase offsets to cover construction emissions. Thus far, I have not considered this in our corporate footprint reporting. However, we are including A5 emissions whenever feasible and multiplying that performance over the... Read more

Welcome to the quiz portion of The Building Envelope: Primers from Environmental Building News.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how thermal mass helps maintain indoor thermal comfort in buildings.
2. Describe the differences between closed-cell and... Read more

We have a client who is asking us to design a roughly 10 ksf Wellness Center for PHIUS 2021 certification.  The program includes several high density assembly type spaces - roughly 300 person peak occupant load for the building.  The Criteria Calculator that the architect showed us puts the building peak cooling load at 4 BTUH/sf (3000 sf/ton... Read more

Hello Green Gurus,

A close colleague of ours, Frances Yang of Arup, is distributing a survey developed in partnership with the Healthy Building Network (HBN).

The survey asks for which product categories you need more health information. Answers will help inform which product categories HBN next incorporates into its HomeFree and... Read more

Hey group,

I'm part of the contractor team on a large commercial project pursuing LBC v3.1 Petal Certification, with one of those petals being materials. This requires the team to meet Imperative 10 Red List.

The ownership group has taken the responsibility of red list vetting as a task of their own. The construction team is to... Read more

Greg Calnago