Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more

To the best of our knowledge, this product is now being marketed under the name Rauhsaser by Better Wall System of Kenora, ON.

At first glance,

An Environmental Handbook for Florida Contractors looks like it deals only with the environmental regulations that Florida contractors must contend with. And, indeed, the Handbook describes in detail the requirements for complying with regulations at the federal, state, and local levels. But the book goes much further,... Read more

EBN Advisory Board member Mike Nicklas led an international delegation of renewable energy experts in promoting sustainable energy at the Earth Summit last month. He and others were negotiating for inclusion of renewable energy and energy conservation measures into agreements being worked out for the United Nations... Read more

Energy Source™ Directory

Energy Source Directory arrived. Assembled and published by Iris Communications, this is the most complete and most useful guide to specialized products and materials used in energy-efficient construction that we've seen. The 500-page directory is... Read more

The City of Austin’s Green Builder Program was one of 12 award recipients in the United National Local Government Honours Programme at the Earth Summit in Rio, and the only winner from the United States. “The purpose of the Honours Programme is to recognize innovative local approaches to... Read more

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

The IECC is accepting applications for committee members for its development of the 2024 International Energy Conservation Code (IECC). The responsibilities of the committees include:

This just in from AIA Leadership:

https://www.aia.org/pages/6522198-aia-statement-on-scotus-decision-in-west-v

Please share this with your networks.

Thanks.

Mary Ann

Hello all,

I have a quick question for you. While Energy Star appliances are a no-brainer for projects, I don't see a hard requirement to select Energy Star appliances in the energy prereq/credit. There are references in the water section for water using appliances like ice machines, dishwashers, clothes washers, etc., but no related... Read more

Here’s a nice NYTimes op ed on urban density that directly addresses the concern Gwen raised on out call today: 

https://www.nytimes.com/2020/03/24/upshot/coronavirus-urban-density-risks.html?referringSource=articleShare

The Minnesota CLF chapter’s Specification Subgroup (myself, Andy Marolt/Ryan Companies, Laura Eder/ESG, Java Nyamjav/MSR Design, with input from Annie Perkins/SFI) recently collaborated on a draft set of specification templates incorporating embodied carbon requirements into product performance and action submittals. This work builds on sample... Read more

On Thursday, September 27 at 2PM Eastern Time you can join the first BuildingGreen Communities webinar where we will share key takeaways from the 11th annual Summer Sustainable Design Leaders Summit (@ the Garrison Institute in upstate New York). Our new webinar format using Zoom will allow for interactive questions and comments throughout. If... Read more

Hi all,

Thanks for your patience as we've finally compressed this video file enough to upload it onto the forum. You can watch the recording of "Are We There Yet? A Sampling and Exploration of Project Process Diagrams" here.

Enjoy!

-Amanda & the BuildingGreen team

Hi MEP Leaders,

I wanted to remind you that our monthly call is today, August 10th, at 2pm ET! This was rescheduled from the usual time - the second Tuesday of the month - due to a BuildingGreen staff retreat. If you usually can't make the Tuesday time, this is a great opportunity to join the call!

Here is the agenda, and below is... Read more