Has anyone developed a disclaimer to be issued with LCA models and reports? I have been asked to look into developing a disclaimer to be used with LCAs, and unfortuantely I have not been able to find past precedence on this. 

Thank you,

Stephanie Fargas

I can see from the threads that there are at least a few Passive House advocates in this group - I'm wondering about the PHIUS training and certification. Can any who have done it offer an opinion? Is it valuable? Residentially focused? Would it apply to someone in a larger commercial practice? It's an investment of time and $, so I really want... Read more

Green gurus!

We're getting some interest from clients abroad on two specific materials which we don't have experience with here in the U.S.:

1) Cross Laminated Timber (CLT)

and/or 

2) CarbonCure concrete

Anyone willing to share lessons learned on these material either here in the forum or offline? Or point me... Read more

Welcome to the quiz portion of Better Steel, Lower Impacts!

Learning Objectives
Upon completing this course, participants will be able to:


Understand the process of how steel is made.

Recount how the U.S. steel industry has been improving its environmental footprint, while improving product performance.

... Read more

Allen Mutapo

Hi SDLers: See the great opportunity to weigh in on the 5th National Climate Assessment at a series of workshops in early 2022. 

Register here:

https://www.globalchange.gov/content/nca5-engagement-workshops?utm_sourc...

Hope all are staying well.

Mary Ann

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

For questions and/or to be added to the Summer Summit waiting list, please email Jerelyn Wilson directly.

2019 Summer SDL Summit
Islandwood, Bainbridge Island, WA
July 31st- August 2nd, 2019

Hello Green Gurus!

Here are the details for the upcoming Peer Networks webinar, The Beneficial Intersection of Energy, Resilience and Health.
REGISTER HERE! Hope to see you there!

The Beneficial Intersection of Energy, Resilience and Health
April 30th, 2020
2pm - 3pm ET (11am - Noon PT)

How can three... Read more

There are a few spots left for the 2018 Summer Architecture + Design Sustainable Design Leaders Summit that is being held August 1-3 at the Garrison Institute in Garrison, NY (Easy train ride from NYC). If you have not already received an invitation, and you play a sustainability leader role - either formal or informal - in a mid-sized (>40... Read more

Hi folks,

We had a rich conversation in our monthly meeting last week. I've summarized the highlights below. Next call is July 11 at 2pm eastern. If it isn't already in your calendar, here's the Zoom link.

What’s on people’s minds?

Looking into high-temp water-source heat pumps for industrial applications. Transom and... Read more

Hi all, are there requirements to include/submit backup documentation to the CC excel template? Or is it just the template itself that gets submitted? The question is coming up from our leadership over what documents are public vs internal.

I wanted to make sure that everyone saw this.   Next Friday is a launch webinar for the Commitment.

Introducing the Contractor’s Commitment       November 13th, 2020          3pm - 3:30pm ET (12am - 12:30pm PT)

This webinar will mark the launch of the Contractor’s Commitment as a pilot program for 2021. We’ll give a brief overview... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

Our firm held off from signing the AIA Materials Pledge because it was perceived as a feel-good commitment to promise to have good intentions, with no tracking.  I was pleased to learn yesterday that reporting for signatories of the AIA Materials Pledge would "open" today (July 18) and close August 31, and would include mandatory reporting on... Read more