Alerting building occupants about indoor air pollutants is important in many situations.

BuildingGreen-Approved IAQ Equipment

Products approved by BuildingGreen range from single-use test kits to monitoring systems installed throughout a building. Some test for gases such as radon, VOCs, or carbon monoxide, and some for mold and... Read more

The BuildingGreen Guide to Thermal Insulation provides detailed guidance on insulation products and practices, including recommendations on what insulation to use and what to avoid. It's a treasure trove of information for architects and designers, builders, and anyone who is actively considering the impact of insulation on the quality of your... Read more

Show & Tell Break-out Session: Post Occupancy Evaluations and Occupant Behavior

Presentations: 

All,

Our firm has been struggling to find carbon reduction strategies for concrete that move us beyond a fly ash only approach. Frankly, the knowledge just isn't there internally or with our consultants. We've known that there are a few folks out there that have a deep bag of tricks, but we haven't had the chance to work with them... Read more

Hi Fellow SDLers: Just wanted to make sure everyone saw the terrific initiatives that the White House announced last week:

https://www.whitehouse.gov/ceq/news-updates/2021/05/17/fact-sheet-biden-administration-accelerates-efforts-to-create-jobs-making-american-buildings-more-affordable-cleaner-and-resilient/

Maybe some impact from... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Welcome to the quiz portion of The Hidden Science of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define hygrothermal pressure and explain what it requires of water, air, and thermal barriers in high-performance assemblies.
2. Explain... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Hi all,

For your planning purposes for next year, here’s info on an in-person event coming up in 2024:

We are excited to announce that we will be hosting an all-peer-networks workshop for SMEPL, SDL, and SCL members at Miller Hull’s office in Seattle on July 15, 2024. We’re still working out the details, but given the recent... Read more

Welcome to the quiz portion of Whole-Building LCA Tools for LEED v4 and v4.1.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Understand the basic goals of whole-building life-cycle assessment, including how it can improve environmental performance and contribute to credit achievement in... Read more

Hi - We have some projects within reasonable reach of ILFI's Zero Carbon Certification, which will require purchasing some off-site renewable energy. As a State Building Code Council member, I'm also eyeing the Zero Code which we will seriously consider in the next 12 months; this also requires a purchase of off-site renewable energy. 

I... Read more

Hi Gang, 

We are looking to implement the contractor commitment and are running into COVID-19 protocol barriers when looking at the Jobsite Wellness category specific to the soap as well as the food storage/eating areas on site. Anyone else run into this issue? 

-Kena 

Hi all,

We are growing our sustainability group at Flad -- we have a great opportunity to make significant progress as we approach 2030, and we are currently looking for someone to join us in our Madison office. If you know someone who is looking for an entry-level sustainability position, and would enjoy living in Madison, Wisconsin, my... Read more

Hello - Other than hiring an acoustic consultant, I am wondering what in-house tools you are using internally at the design stage for modelling acoustic performance? 

Thanks, Mona

Hi all,

We are trying to encourage participation in take-back programs and using recyclable packaging with our vendors and I was wondering how we can add it to specifications. Does anyone have any examples on how we can add wording in specs about participation in take-back programs, using recyclable packaging and/or reducing non-... Read more

BuildingGreen recommends low-emitting acoustic ceilings that do not contain formaldehyde resins or PVC coatings. Look for those that have C2C Silver or Gold certifications, are Declare Red List Free, and are third-party certified for low emissions using CDPH Standard Method. We also prefer wood ceiling products with FSC certification. The... Read more

I see Kjell Anderson, Mary Ann Lazarus and Daniel Overbey as the Green Gurus on this list - if i missed anybody apologies.

Congrats all around folks!

https://www.usgbc.org/articles/gbci-announces-2018-leed-fellows