Hi, the SF Dept of Environment is doing some surplus construction materials studies there are surveys for designers and contractors.  They are looking for a wide array of responses, so don't worry if you don't live in that area!

See link for contractor survey if you are interested: 

https://formfacade.com/public/... Read more

Welcome to the quiz portion of Whole-Building Life-Cycle Assessment: Taking the Measure of a Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define key concepts of whole-building LCA.
2. Recognize the inherent flaws, and potential gains, of whole-building LCA... Read more

Has anyone seen a comparison between IECC 2021 and previous versions of the energy code, including ASHRAE 2010? I'm curious how far ahead code buildings are relative to LEED v4.0, and how much the latest IECC raises the bar relative to the previous. I did a quick search for the LBNL and other studies that look at this, but didn't see anything... Read more

Hello SCL,

Version 2.0 of the Contractor's Commitment has officially been ratified with 33 "yes" votes out of 52 members. Congratulations, and a big thank you to everyone who helped move this forward--especilly Amanda Atkinson, who really took this project by the horns. 

You can find the updated version here.

Next, I'll be... Read more

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

Will you be at Greenbuild in Chicago? Stop by BuildingGreen/LEEDuser booth #1522 for informal conversations with guest experts and BuildingGreen editors. You are encouraged to RSVP and add the meet-ups to your calendar, but not registration is not required.

WEDNESDAY NOV. 14

10:45 AM - 11:15 AM
Dan Winter, Neil... Read more

Hello - Other than hiring an acoustic consultant, I am wondering what in-house tools you are using internally at the design stage for modelling acoustic performance? 

Thanks, Mona

Hi all,

Just like many of you, our firm is dedicated to increasing representation in the professions and through its relationship to the AIA Large Firm Round Table was able to access a National Organization of Minority Architects Fellow this summer. We’re loving our work with Himesh thus far, but it’s unclear whether we have the workload... Read more

For folks in the Southern New England, New York City area, I wanted to let you know about this interestesting design summit that is focusing on eliminating forced and slave labor in the building materials supply chain. I am not involved in organizing the summit, but I plan to attend. It is at Grace Farms in New Canaan, CT from 9:00 to 5:30 on... Read more

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

Some of you saw my 5-minute presentation about the Rich Earth Institute in Brattleboro, Vermont and how it is inventing new ways to keep excess nutrients from urine out of surface waters and use them instead as fertilizer. Now you can also hear about it on Planet Money: https://www.npr.org/sections/money/2018/01/26/581156723/episode-820-p-is... Read more

Lighting can be inefficient and have poor quality, short lifespans, and toxic ingredients.

BuildingGreen-Approved Replacement Lamps and Lighting

BuildingGreen approves a variety of replacement lamps and lighting, including:

I am still basking in the afterglow of this week's summit, and getting ready to share nuggets of wisdom with my colleagues at our all-staff next week. I was so immersed in the moment that documenting the outlines and choices presented for breakouts slipped my mind. Is there somewhere to access these slides to refresh my memory?

Thanks... Read more

I am wanting to take the pulse of this group on behalf of a manufacturer who has asked us a similar question.

The company in question makes wood products and has had FSC CoC for over a decade. Recently, they are encountering issues with sourcing FSC for about 50% of the wood species they offer. There just aren't FSC sources available.... Read more

Hello everyone,

Wondering if anyone has evaluated/considered/specified wood fiber insulation for use in lieu of mineral wool as the exterior wall insulation?  Am mostly looking to better understand domestic availability, r-value and fire/combustibility.

We have a multi-family building in DC where the client is interested in using... Read more

The sheer number of building product certifications and labels is overwhelming, and even those experienced with green labels can get exhausted trying to figure out which are relevant and which aren’t.

The confusion in the market over green labels can complicate efforts of both manufacturers and design professionals... Read more

Sign up now to roll up your sleeves and have fun solving real problems! April 28 from 3-5pm ET

DESIGNING FOR DECONSTRUCTION

Building deconstruction, or disassembly, is a critical strategy for carbon reduction, minimizing waste & contributing to a circular economy, yet remains a serious challenge for many reasons.

Many... Read more

Welcome to the quiz portion of Mind the Gaps: Making Existing Buildings More Airtight!

Learning Objectives
Upon completing this course, participants will be able to:


Identify key performance problems related to leaky building enclosures.

Examine the benefits of making existing buildings more airtight, such as... Read more