Hi Everyone.  Hope you and your families are all healthy and safe.

We are starting to figure out how we are going to implement the Contractors Commitment at my company, and we're using the opportunity to simultaneously set corporate wide and jobsite metrics and goals for sustainability tracking.

Each year we issue a sustainability... Read more

Hello Sustainable Design Leaders!

Here are the details for an upcoming SDL Peer Network web call, this webinar will be a call to share research and resources around mass timber. Hope to see you there!
REGISTER HERE!

Embodied Carbon and Mass Timber – a shared learning conversation
March 31st, 2020
3pm - 4pm ET (... Read more

I'm sure if I hop in the way back machine I could look in the forums and find old threads on LEED GA and LEED AP study resources, but I also know that material comes in and out of date. Has anyone found a good, current solution for firmwide LEED study materials?

We used to have some GBES resources, but those are intended to be person-... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

If only a few of the Best Practices will have checklists, which will be included under the "Implementation Toolkit" tab, I'm thinking we can simplify them (compared with LEEDuser).

I've attached a screenshot of a LEEDuser checklist. But I don't think BITuser will need the four types of icons, and the legend will take up more space than... Read more

Gather with the Changemakers in Sustainable Construction

You are invited to join BuildingGreen and your peers for the Summit that has always delivered on driving our movement forward. Over three days of collaboration, workshops, learning, sharing, networking, and socializing, we’ll set the agenda for changes to LEED v5, strategize on... Read more

Are your clients asking you about wellness? You’re not alone. Healthy interiors and wellbeing are the trending buzzwords of sustainable design. Lighting design for circadian rhythm and water filtration methods might be on the... Read more

hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more

If anyone else has gotten confused going between parts-per-million and percentages (parts per hundred!) for material reporting here's a little infographic that might help. Feel free to use or improve! 

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

How much will it cost to achieve LEED v4 certification?

“We’d love a green building, but can we afford it?”

“We’re required to be LEED Silver, but we’re not sure how to get there under the new rating system.”

“Sure, we’re interested in LEED, as long as it doesn’t cost extra.”

LEED v4 and cost uncertainty

With... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Constructed wetlands and other natural filtration systems close the nutrient and water loop, permitting safe and sustainable wastewater treatment and reuse right on the site.

We look for... Read more

Hi, all. We missed you at the standing check in today. We have a couple of questions for the BG team:

1. What is the timing criteria you need for Best Practice content? We need to back into a deadline on submissions and believe your critical path timing will help define ours.

2. Can you elaborate on what LEED User/BG content may... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor? 

Hi Everyone - I'm posting this on behalf of Jeff Frost whom many of you know from his days as an SD Leader with SmithGroup and SERA and in his new role as head of Brightworks Sustainability's materials group.  I am excited to be working with Jeff on this concept of multi-attribute product scoring.  Cheers, Lona

Dear SDL’ers,

We’ve... Read more