We have an environmentally-minded client who asked us to look into an alternative to the blue adhesive film that is typically used to seal uninstalled ducts for IAQ purposes. From a human health and waste perspective, they were hoping to find something that was both plastic-free and reusable. Has anyone tried out other options? I thought it was... Read more

Hi all,

Jacobs is looking to hire specifically for sustainability needs! We have a current job posting for a Senior Sustainability Specialist now up, and anticipate a similar posting soon for a mid-level person as well. Location for these would be in the Mountain or Pacific time zones, remote work is fine; other future anticipated posts... Read more

Hello Green Gurus! We are diving deep into our carbon metrics this year and are finalizing some of our emissions factors for our Scope 1 and 2 emissions and in a few more months Scope 3. I'm hoping this brain trust has some recent knowledge to share on this topic. What we've found is there's a fairly big variance in what we've seen in published... Read more

Hi folks,

It came up on the Regional Leaders call this week that many people aren't aware that we added a link to the BuildingGreen Communities in footer of BuildingGreen.com. So if you want an easy way to get to the forum page, other than clicking on a link in an email, there it is! (Thank you, Stephen Endy!)

The footer has a... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Live webinar approved for 1 AIA LU and 1 GBCI CE hour. Each person intending to earn CEU credits must purchase their own seat.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than... Read more

The Resilient Outcomes Working Group grew from a session at the 2020 Winter Summit in Gulf Shores AL, and we are still going strong.  We are currently focused on three primary objectives: 1) bringing awareness to resilient design through a presentation at the GreenBuild 2024 Resilience Summit (we'd love to see some peer network friends at our... Read more

Hello All,

News Bulletin: The 2020 SDL Winter Summit will be held January 29th - January 31st, 2020 at The Lodge at Gulf State Park, Alabama!

During the 2019 Winter Summit, we discovered such an amazing venue at the Gulf State Park in Alabama that we’ve decided to go back! This incredible beachfront hotel designed by Lake|Flato is... Read more

Thank you BuildingGreen for yesterday's fun news and much needed chuckles.  I really appreciated the GOOP article the most! I mean, dare I say, a kegel powered elevator - absolutely brilliant!

If you have not seen the April Fool's edition, take a look at the talent and time that was put into these stories.

https://www.... Read more

Hi all,

Due to the eclipse, Nadav and I will be out on our usual call day, April 9th, and we anticipate others may as well. We will be moving the call to Tuesday April 16th at the usual time (2-3pm ET). For this meeting, we'll be holding a whiteboard session about MEP2040, the development of plans to achieve it, and tactics to getting... Read more

Welcome to the quiz portion of The PVC Debate: A Fresh Look.

Learning Objectives
Upon completing this course, participants will be able to:


1. Examine the actual cost-effectiveness of PVC in terms of quality.
2. Explain what makes PVC a health hazard.
3. Recognize market effects of PVC's durability and... Read more

Hi All,

Sasaki is hiring a Director of Sustainability and Resiliency.  See attached.  Please forward along to folks who might be interested.

-Meredith

Folks, would love to hear what software you're for in-house daylighting/energy performance modeling at the SD/DD level. My IT folks have been pushing us to try out Autodesk's Insight again after a not so impressive pilot we did a few years ago. Has it gotten better? Was it us? What programs do you feel good about? Which ones really make you mad... Read more

This question came to me via our mutual friend Josh Jacobs, but while interesting it's a bit out of my range of expertise... 

In short, a critical materials assessment specifically focused on airbourne byproducts from a manufacturing process that would be first-of-its-kind in the U.S. 

Has anyone worked with Vidaris for LEED certification and have a contact there? If you want to direct email me with feedback on the experience that would be helpful as well.

Hi Folks, anyone in Boston (or willing to move) this could be a super cool opportunity for you! 

https://careers-bpda.icims.com/jobs/1557/senior-resilience-design-reviewer/job?mobile=false&width=805&height=500&bga=true&needsRedirect=false&jan1offset=-300&jun1offset=-240

Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.