Using energy for cooling during peak hours places a large demand on utilities, is expensive, and can be less efficient than off-peak energy production.

BuildingGreen-Approved Thermal Energy Storage

BuildingGreen lists a variety of  thermal energy storage systems.

About

Off-peak cooling, or thermal energy storage (TES... Read more

Here’s a nice NYTimes op ed on urban density that directly addresses the concern Gwen raised on out call today: 

https://www.nytimes.com/2020/03/24/upshot/coronavirus-urban-density-risks.html?referringSource=articleShare

All,

The Idaho Division of Occupational and Professional Licenses (DOPL) has undertaken the Zero-Based-Rulemaking process this year to eliminate all requirements that are not specifically life-safety related.  As such, they have proposed removing the International Energy Conservation Code (IECC) 2018 provisions regarding commissioning... Read more

Figured I'd throw out this topic to the hive mind!

We are working on a project in the Midwest that involves taking down and replacing an 100-ish-year-old brick building. We are hoping to find a way to salvage and reuse some of this brick in new construction. I'd love to do an LCA comparison showing the benefits of salvaging the brick vs... Read more

Hi all,

We've had a number of clients in the states surrounding Texas that have been hit with really high natural gas bills for February. Some as high as $2.00+/therm. Many are healthcare facilities.  Has anyone seen any federal, state, or utility relief programs that are assisting customers with these bills?

Thanks, 

Adam... Read more

Has anyone worked on a WELL project? I have heard that you can expect about 1.5 to twice the effort of LEED coordination but wasn't sure how accurate that was. Any suggestions for determining the possible time commitment of WELL coordination?

Thanks in advance!

I really enjoyed last week's "Integrative Solutions Jam - Getting Better Materials Into Projects".  Thanks BuildingGreen for setting that up.  One of the great parts were the break out groups, where 4 of us could dig into various topics more deeply.

We got into a conversation about circularity and material re-use and Laura Soma with Gly... Read more

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Greetings Heat Pump Water Heater (HPWH) advocates!

We have an opportunity to advocate to the US DOE on behalf of HPWHs!

Geoff Wickes is an emerging technology product manager for NEEA (Northwest Energy Efficiency Alliance) currently focused entirely on HPWH technology, policy, and market adoption (and in full disclosure: also a... Read more

Want to make sure those in Portland are aware of a couple of LF18 Ramp-Up Events happening on April 10th. 

Introduction to the Living Building Challenge (presented by Kathleen Smith)
https://living-future.org/events/introduction-to-the-living-building-challenge/

Incentivizing Living Buildings in Portland 
https://... Read more

Welcome to the quiz portion of BuildingGreen’s Top 10 Green Building Products for 2018.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the transparency and optimization criteria in the LEED v4 (applicable to  Building Product Disclosure and Optimization credits in LEED v4 BD+C and... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Should housing be affordable? Or should it be sustainably designed, built, and operated?

When you put it like that, the question sounds absurd.

But the idea—usually unspoken—that sustainability wastes precious time and resources is painfully common in the... Read more

Hello, 

We have recently been introduced to the Innovation Design Consurtium and are considering becoming members. Wondering what others have experienced with this recently created group. Any feedback / experience is most appreciated.

Thanks!

Nice brief article on how to talk to clients about materials transparency. It was the right level of information to send out to the office at large. Kudos to Lona and Ralph for your contribution.

https://www.aia.org/articles/210821-how-to-talk-to-clients-about-materials-tran

Welcome to the quiz portion of The Building Envelope: Primers from Environmental Building News.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how thermal mass helps maintain indoor thermal comfort in buildings.
2. Describe the differences between closed-cell and... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Vapor retarders are meant to protect our building assemblies from getting wet, but they can also slow drying, contributing to mold and structural degradation.

BuildingGreen-Approved Vapor Retarders