News Analysis
A study published in the June 5, 1992, issue of
Science by researchers at the Lawrence Livermore National Laboratory and the Institute of Atmospheric Physics at the University of Arizona suggests that smoke emitted into the atmosphere from human activities may be having a significant effect in counteracting... Read more
News Analysis
EBN Advisory Board member Mike Nicklas led an international delegation of renewable energy experts in promoting sustainable energy at the Earth Summit last month. He and others were negotiating for inclusion of renewable energy and energy conservation measures into agreements being worked out for the United Nations... Read more
News Brief
At first glance,
An Environmental Handbook for Florida Contractors looks like it deals only with the environmental regulations that Florida contractors must contend with. And, indeed, the Handbook describes in detail the requirements for complying with regulations at the federal, state, and local levels. But the book goes much further,... Read more
Explainer
Product Review
Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more
Product Review
To the best of our knowledge, this product is now being marketed under the name Rauhsaser by Better Wall System of Kenora, ON.
CoverAge is a tacky name for a great product that all remodelers should know about. It is a paintable, textured wallpaper that’s made entirely of recycled paper (at... Read moreNews Brief
Energy Source™ Directory
Life has been a whole lot easier around the office since theEnergy Source Directory arrived. Assembled and published by Iris Communications, this is the most complete and most useful guide to specialized products and materials used in energy-efficient construction that we've seen. The 500-page directory is... Read more
Feature
Susan Maxman is the first AIA president to make sustainable design a priority.
Q.Where would you say architects as a group stand on environmental issues?
A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more
Op-Ed
Introducing the first issue of our newsletter.
Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more
Feature
Carefully stake the building site and driveway, remove trees that are within the excavation area or too close, then erect a fence to keep heavy equipment off fragile soils and away from nearby trees.
Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:
•Enhancing comfort by shielding the house... Read more
News Brief
The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more
Feature
Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more
Forum topic
At the summit we discussed sharing which consultants our firms have used for anti-bias training and EDI education. My office will participate in the upcoming AIA Seattle pilot Intercultural Leadership Program, but that only includes two of our firm leaders. If anyone can refer a consultant in the Seattle region for all-office trainings, I'd... Read more
Forum topic
Hi all,
We are designing a mass timber building and are closing in on selecting our mass timber supplier. One supplier is offering FSC wood and the other is offering PEFC. I don't know enough about PEFC to make a clear recommendation to the client about how it compares to FSC. I understand that PEFC endorsed SFI, so that concerns me... Read more
Forum topic
Happy New Year!
I haven't seen this topic come up in the forum, but might have just missed it.
I'm sure many of you have seen the recent article in Dezeen of Australia banning engineered stone due to links silicosis. Australia bans engineered stone due to silicosis risk (dezeen.com)
We are looking for appropriate... Read more
Forum topic
All,
I wanted to spread the word to all of you that AIA Minnesota is hosting a virtual edition of Materials Matter, a five-part series starting next Wednesday 3/24, from 10AM-3PM Central Time on five Wednesdays throughout March, April and May. Come to one ($15 per session) or all ($60 for the whole series of 20 CEUs, including GBCI... Read more
Quiz
Welcome to the quiz portion of Passive Solar Heating.
Learning Objectives
Upon completing this course, participants will be able to:
1. Explain the three classic approaches to passive solar.
2. Understand the relevance of passive solar today.
3. Describe some key elements of passive solar design.
... Read more
Reports, Courses, Study Guides, Live Webinars
Note: This webinar is complete and registration is closed.
Join us for a live sneak preview of our Top 10 Green Building Products for 2021. Our team has selected them from thousands on the market—this year with a focus on carbon and global warming. Products & Materials Specialist Brent Ehrlich will walk you through why we chose... Read more



