We have all these resources out here in the ether but it’s so hard to pull them into one spot! I was asked, last minute to join a client call today to help convince both the client (affordable housing developer) and the mechanical engineers to "stick with" a commitment to 100% electric design that was publicly stated when the competition was... Read more

I wanted to post a reminder for you all that the Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to... Read more

Welcome to the quiz portion of How To Run a Great Workshop: 37 Tips and Ideas.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how the right mindset contributes to a successful design workshop.
2. Schedule a design workshop, set its agenda, and balance the skills of its... Read more

Is your team ready to increase its sustainability knowledge? A team membership allows colleagues to work and learn collaboratively. We offer 10-person, 20-person, and 30-person team memberships. Make BuildingGreen your team's all-in-one... Read more

Exterior paints, stains, and primers—particularly alkyds—can have very high volatile organic compound (VOC) levels and can contain numerous chemicals of concern.

BuildingGreen-Approved Coatings

BuildingGreen lists exterior coatings that meet the South Coast Air Quality Management District’s (SCAQMD) VOC requirements of 50 grams... Read more

We broke up into 5 discussion groups by market sector:

Here are the proposed "guiding questions":

Hello fellow SD leaders,

This is a quick note to re-introduce myself to this group. I am a lapsed member from the original tribe of 2008 who has found my way back on a trail of bread crumbs left by Nadav (thanks Nadav!). I'm just glad to be back amongst my people, sharing and learning from you all, as we help each other to get where we... Read more

Hi all,

Thanks again to those who presented at the AIA Show & Tell! Here are the slides for some of the fascinating presentations we saw. Please do not share the slides outside of the networks unless they are marked “PUBLIC.”

There may be more to come; if you presented but did not yet provide permission for your slides to be... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

Hi All,

Has anyone successfully adopted a Revit to ClimateStudio workflow with their new export tool? Right now we are using cove.tool because it works reasonably well with iterative Revit modeling, but are itching to try a more accurate and nuanced alternative.

Thanks for any and all experiences!
Misha

We are looking to refine our general office specifications to weed out harmful materials and to prioritize sustainability for all of our clients. Have you had good experience with outsourced specification writers who are helping to push sustainability forward? Who do you recommend? Bonus points if they are familiar with Massachusetts codes and... Read more

Hello everyone,

So sorry that some of you couldn't get onto the call on Tuesday! There was a bit of a problem with our Zoom links. I think we've figured it out, so we should be all set next time.

Here are the notes from the call. If you have any questions about something on there, please feel free to post them here and we'll try... Read more

Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)

We have a client who is asking us to design a roughly 10 ksf Wellness Center for PHIUS 2021 certification.  The program includes several high density assembly type spaces - roughly 300 person peak occupant load for the building.  The Criteria Calculator that the architect showed us puts the building peak cooling load at 4 BTUH/sf (3000 sf/ton... Read more

Hey, all. Two questions:

-How do we communicate to you LEED User content that needs to be pulled through to BIT-user pages? Are you all going to assess each BP page for potential articles/topics that will be linked?

-Regarding the forums- is there a way to notify program staff when a forum has an unanswered question? Hoping to... Read more

The Path to Zero Carbon is a series of rigorous, deeply researched white papers produced by Kjell Anderson and others at LMN Architects in collaboration with subject matter experts from across the industry--including some of you! Architecture 2030 is exploring capacity and funding needs to host and convene experts to regularly update the series... Read more

Hi folks,

It was fun going back over all the great conversations we had and pulling them together in this report. Please feel free to share it with anyone--no constraints on that!

Also, we'll have a webinar next Friday based on this report-- March 8 at 2pm eastern:

I'll show the report and share key takeaways from the 12th... Read more