Welcome to the quiz portion of Raze or Retrofit? Six Extraordinary Answers to an Everyday Question.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand how the embodied impacts of renovation compare to those for new construction.
2. Provide three reasons why building... Read more

Howdy all,

Following up on Emily's post (https://www.buildinggreen.com/forum/aia-2030-zero-tool-vs-cbecs-baseline) on AIA2030, the folks on the steering committee's monthly call thought it'd be a good idea to do a general call for feedback on reporting this year while the bangs and bruises are still fresh. The intent is to compile the... Read more

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more

I am wanting to take the pulse of this group on behalf of a manufacturer who has asked us a similar question.

The company in question makes wood products and has had FSC CoC for over a decade. Recently, they are encountering issues with sourcing FSC for about 50% of the wood species they offer. There just aren't FSC sources available.... Read more

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

For a number of years a colleague and I have been teaching a course about sustainability and water in architecture at the University of Pennsylvania's architectural school (PennDesign).  This year we're hoping to bring a few new opinions to the table for at the same time as we broaden the discussion.  Because the class will be virtual again... Read more

Lake|Flato is growing our design performance team!  If you know any great applicants for our new design technologist position, please send them our way:

Design Technologist in San Antonio.pdf (lakeflato.com)

Welcome to the quiz portion of LEED and WELL Product Labels: A Guide and Analysis!

Learning Objectives
Upon completing this course, participants will be able to:


Recognize product-related programs for LEED v4 BD+C, LEED v4.1 BD+C, WELL v1, and WELL v2 that contribute to the sustainability of projects and the health and... Read more

Here is your friendly reminder to complete the SCL Salary Survey if you have not yet.

There is a link at the end of the SurveyMonkey Survey to a Google form where you will be able to register that you completed the survey—that way we’ll know who participated without having any identifying info in the actual survey. Results will be shared... Read more

Mark your calendars! Wednesday March 9th, 3-4pm ET (12-1pm PT) - Sustainability Leaders State of the Regions.

We’ve seen a lot of momentum building around the potential for regional Sustainability Leaders groups, and we want to learn how best to support this activity. On this call, we’ll have a few currently active regional groups share... Read more

Hello Sustainable Community Design Leaders,

The SDL Winter Summit (Jan 23-25, Tempe AZ) has a few spots still open, so we are excited to invite SCDL members to join! This is an opportunity to plug into the conversations happening in the Sustainable Design Leaders group, plus a possible chance to carve out some in-person SCDL time.

* This gets complicated -- how much should happen on the dashboard and how much should happen in the actual Discussion forum?

Hold off on discussions for Phase 1. What should be here instead for... Read more

There has been a lot of discussion re antimicrobials in this group, so here is a pre-release of this month's article on the topic. It's not an extensive feature, but I hope you find it informative.

Brent

This is sort of dragging up an ancient topic, but curious how your firms are currently addressing accreditation (LEED AP, WELL AP, LFA, etc.). There was a time when we were all talking about this, and a number of firms instituted requirements, but it has been a long time, and I'm curious how it's looking now in 2024. Thanks! 

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Live webinar approved for 1 AIA LU and 1 GBCI CE hour. Each person intending to earn CEU credits must purchase their own seat.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than... Read more

Welcome to the quiz portion of Making Windows Work Better.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand when window attachments may be used in lieu of window replacements.
2. Summarize why optimal management of heat loss and gain may require both interior and... Read more