Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Quiz body

Hans “Grumpy” Grimm

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

If you have been wondering about the Contractor Commitment, we have an update for you!

Several weeks ago, the subgroup leaders and the Steering Committee members gathered to agree on a basic structure for the Commitment. The idea was to align the basic expectations around issues like how many tiers there would be, what would be disclosed... Read more

EDITED LINK

Hello, below is a link to our newly uploaded research report, Embodied Carbon in Commercial Furniture. This new research report introduces a case study and some new baselines for measuring the carbon footprint of commercial furniture, to add to a growing body of work on this topic among our peers:
Embodied Carbon in... Read more

Hi all!

A couple years ago now there was an incredible thread here about circadian lighting design and WELL. There was a lot of dipping toes in the water with intent to gather lessons learned and report back.

What have been the high points and low points of circadian lighting design so far? What seems cost-effective and worth... Read more

The Sustainable Design Leaders peer group brings together the most committed sustainable design directors from leading architecture firms throughout the U.S. and Canada. We invite you to apply for membership.
We look for the... Read more

Team,

After talking to UL today, I thought it will be good for them to do a presentation on what they see in embodied energy/carbon road map of MEP equipment can be like.

Should we schedule them for a 30 minutes presentation in the next call?

Best,

LL

Dear Colleagues,

I proposed CarbonCure for a project and the structural engineer in the meeting was opposed to it. He later sent me detailed reasoning by email. I have not used this technology and would like to hear other more experienced opinions on the technology. The project we are working on is well integrated with climate, 99% sDA,... Read more

I'm looking to change consultants. Let me know if you have worked with a 179D consultant that you would recommend.

Hi all,

We are looking for a great energy analyst with communication skills  to join NBBJ - if you know someone who fits the bill, send them my way! http://jobs.jobvite.com/nbbj/job/oTrk8fww

Margaret

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Water and air that penetrate building assemblies can damage materials, cause energy loss, and lead to mold, mildew, or other problems. The products used to address these may contain materials that are... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

I'm looking to draft some one-page briefs for my consulting engineers to outline what we would like to see in their specs regarding certain materials and systems. For example, letting the plumbing and civil engineers know that we prefer to eliminate PVC pipe and want them to specify alternatives like Polypropylene, cast iron, ABS, etc. The idea... Read more

Has anyone had a Contractor track GHG emissions during construction? If so, any advice on how to include that in the project specifications?

Thanks!

Yarden