BuildingGreen Report

Forum topic

I'm just wondering if anyone is using GBCI's Better Materials site as their go-to source for transparency and healthy materials.  Having all the search engines on one platform is great in theory, and I keep hoping that it will be the one-stop site/resource that I can get all our designers to use.  Unless I'm missing something though, it still... Read more

Forum topic

All,

I think there may be more than a few people interested in an article I co-authored titled Comparative whole building life cycle assessment of renovation and new construction. It is now available in the journal Building and Environment. Fortunately we have a link that gets you past the paywall that is good for 50 days. If you have... Read more

Product Guide

An induction range capable of replacing a standard gas range offers the potential of significantly reducing the energy required for ventilation in a commercial kitchen and improves IAQ at home.

BuildingGreen-Approved Ranges

We look for commercial-scale as well as residential induction cooktops and ranges designed to reduce indoor... Read more

Forum topic

Hi, folks! 

I was recently asked if BuildingGreen could connect prospective speakers to an event organizer in Chicago. Beyond the leaders in the BuildingGreen networks relayed, I wanted to share that the exercise led me to the Women and Climate speaker database: https://www.womenandclimate.co/speaker-database 

When filtering by... Read more

Forum topic

Hi all - many of you have been involved in our project to crowdsource the best building performance graphics and make them searchable and freely available. After redesigning the website for functionality and bi-monthly (instead of annual) competitions, we are launching our first of these Challenges: Daylight + Glare. Upload a graphic or three,... Read more

Forum topic

Hello,

Are you seeing any traction with LEED v4 O+M: Transit?

Cheers, Mona

Forum topic

Hi folks,

With all the build-up to Greenbuild (don't miss the Tuesday Show-and-Tell if you'll be in town!), I nearly forgot about another opportunity, coming up sooner! A bunch of us will be in Cleveland in early November for the first Building Resilience conference that BuildingGreen is helping to organize with ILFI and the Resilient... Read more

Sales page

THIS WEBINAR REGISTRATION IS CLOSED.

A Free LEEDuser Coffee Talk occurred on Tuesday – September 19 – 1:00 to 1:45 p.m. Eastern (10:00–10:45 a.m. Pacific)

Point: Green building is all about the environment—not social justice.

Counterpoint: The green building movement must ensure that the benefits... Read more

Forum topic

I have to admit that I wasn't particularly paying attention to LEED during Greenbuild, but anyone recall the "big announcement by USGBC" that LEED v4.1 is coming?

Article can be found @ Green Building Law Update by Stuart Kaplow and the title is "LEED v4.1 Announced by USGBC at Greenbuild."

https://www.greenbuildinglawupdate.com/... Read more

Peer Network Event

Forum topic

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Forum topic

I came across these open roles recently on Gensler's career page. Sharing them here if there is any interest in this group. As I understand it, though the roles listed are in NYC and NJ, they would be OK if the person reported to one of the following offices: NYC, Morristown, Boston or Toronto.

Sustainability Specialist – NJ: https://... Read more

Author

For more than 30 years, Alex Wilson has been the most trusted voice on energy efficiency and environmentally responsible design and construction. Since launching Environmental Building News (EBN) in 1992, he’s built a reputation, resources, and staff to provide the foundation for BuildingGreen, a consulting and information company... Read more

Quiz

This summit was pre-approved for 3.5 AIA LUs and 3.5 GBCI CE hours.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

Forum topic

Hello SCL- as we move closer towards the release of the Contractors Commitment we have realized that we need a donation of graphics/marketing help from one of our member firms.

We are looking for help with a BG SCL Contractors Commitment logo, landing page, document organization, and any graphics we might need to highlight the... Read more

Forum topic

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

Forum topic

If you haven't already, please post a brief introduction to the group with your firm, the roles you play especially as they focus on sustainability, a bit about your background and anything you are particularly passionate about. Thanks! 

Forum topic

Hey All,

Those of us in the electrification working group have been talking about the impending release of this new NREL tool, which provides hourly (TOU) GHG emissions forecasts for grid regions around the country. This will be a useful tool in evaluating the impacts of HVAC electrifcation, EV integration, load shifting, storage, etc. I... Read more

Forum topic

Hi Advising Leaders!

Lets get this forum going by introducing ourselves (yes, I know we mostly know each other, but just to be sure). And sharing what's most exciting and/or bugging us these days. Oh, and if you haven't already, please fill out your BG.com profile with a picture and bio. 

I'll start. I'm Nadav, president at... Read more