Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than ever. But higher performance... Read more

On LEEDuser we divide checklists into multiple project phases. Specifically:

How many of these phases are relevant for BIT best practices?

Note that we also... Read more

Under a high carbon scenario, most of North America will be 2 degrees C hotter by 2050. Meantime, we're designing buildings that will still be around in 2050, to codes that don't yet factor in chronic risks associated with climate change. I want to explain these risks to my colleagues; I'm hoping some of our green gurus can help answer the... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Discarded tires are an environmental disaster, and finding a beneficial use for them is a high priority.

BuildingGreen does not approve any flooring product that is made with tire-derived rubber, though some products may be appropriate for exterior use.

Hi friends,

We recently tracked our water consumption on site during the structural demolition of some existing reinforced concrete buildings.  The new OSHA silica regulations required us to keep dust to virtually zero, so we had a bunch of mist cannons and water hoses pumping water around the clock.  We consumed ~855,000 gallons in a... Read more

Our high performance consulting team is frustrated by project teams that regularly fall back on outdated rules of thumb in their system and equipment sizing. 

What challenges do you face in your work flow to limit oversizing and promote right-sizing?

By the way, Roger Chang, our literature search on the subject turned up an eleven... Read more

Greetings friends.

Many of you have heard about the CARE Tool, (formerly the 2Build or not 2Build Carbon Calculator.) We are now in the final stages of bringing it online as a free, open access tool hosted by Architecture 2030. We are finalizing and aligning data and working with a web developer (the same one that brought us... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hey group,

I'm part of the contractor team on a large commercial project pursuing LBC v3.1 Petal Certification, with one of those petals being materials. This requires the team to meet Imperative 10 Red List.

The ownership group has taken the responsibility of red list vetting as a task of their own. The construction team is to... Read more

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

Hi there, 

We know some of you have been vetting the Contractor's Commitment within your company and are eager to sign up. Good news--enrollment is now live on the website! Download the form by clicking 'Sign the Commitment' on the right sidebar and return it to me with your logo. Any bets on who will sign up first?

https://www.... Read more

Boyd is part of the marketing team at BuildingGreen, where he supports analytics and social media engagement.

Boyd’s experience before joining BuildingGreen includes a decade in the paddlesports industry guiding whitewater trips as well as 5 years working in beer and wine manufacturing with a focus on customer interaction as well as... Read more

Welcome to the quiz portion of Green Building Product Certifications: Getting What You Need.

Learning Objectives
Upon completing this course, participants will be able to:


1. Differentiate between a standard and a certification.
2. Describe "greenwashing" and list at least two ways to spot it.
3.... Read more

Good morning SDL,

I have a request for all of the supply chain labor folks out there… I would welcome hearing about your experience/stories/pointers you have based on your project work applying the DfF toolkit or other comparable supply chain labor efforts.

We have a socially minded client that is interested in Design for Freedom... Read more