Hello Green Gurus!

Here are the details for the next Peer Networks Webinar (happening next week!): Don't forget to REGISTER HERE!

Define and Contract for Building Performance Simulation Services Using ASHRAE Standard 209
Thursday, February 13, 3pm EST (12pm PST)

ASHRAE Standard 209-2018 “Energy Simulation Aided Design... Read more

I'm hoping for some help answering the question of whether buildings/communities should pursue net-zero energy on site versus investing in new renewable energy (i.e. through the electric utility) that can be built at a more efficient scale elsewhere in the state. Our utility is asking us this question as we are working through how to get the... Read more

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Hi SDL Group - 

Our firm has been presented with a potential opportunity to share with USGBC National Representatives details about a few of our voiced concerns in the context of specific project administration efforts.

For us, these relate to two specific factors:

Pumpy Nullifidian

Hi All,

I’m pulling together a Healthy Building Summit in Boston on August 14th.  Check it out here.  http://usgbcma.org/hbs18/

Nadav is moderating!  It would be great to have some of you great leaders in attendance.  We still have sponsorship opportunities. Let me know if you are interested.

-Meredith

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Are your clients asking you about wellness? You’re not alone. Employee health and wellbeing has been called the ‘second wave of sustainability.’ In this hour-long live webinar, GreenStep Education’s Alex Spilger will walk you through Fitwel certification, including its requirements... Read more

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

Welcome to the quiz portion of Raze or Retrofit? Six Extraordinary Answers to an Everyday Question.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand how the embodied impacts of renovation compare to those for new construction.
2. Provide three reasons why building... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hi All,

As you know from the SCL Summit last year, I have been organizing a task group to create a draft of our SCL Contractor Commitment. We have come up with a short Tiered commitment draft as well as some best practices and challenges that led us to the commitment. I encourage everyone to take a look at the draft and please send any... Read more

I have been watching LEED Zero for a while, and have appreciated certain things, but one thing I think is an absolute disaster is their allowance of mainline RECs for claiming Zero Energy and Zero Carbon performance.  I just asked this question on the LEED Zero webinar, and the panelist basically said, "it's part of LEED Zero, therefore it is... Read more

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

Show & Tell Breakout. Presentations:

Hi folks,

Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:

Thursday, July 18, 2pm EDT (11am PDT)

The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more

We have a client thats going through a TI remodel in a building thats a LEED Core+Shell certified building. One of the questions we are trying to figure out is are there things we need to be doing to not imperil the building's certification. 

I think the answer is that the landlord had to write tenant guidelines at the time of... Read more

Hi All,

Polling the group to see if anyone has experience with Simergy - an e+ based modeling tool?

The tool appears to have features and integration with a lot of e+ plugins that make it attractive - but i haven't heard of its widespread use.

Is anyone successfully using Simergy?