Allen Mutapo

I've been hearing recommendations for bipolar ionization, as a way to filter airborne virus particles in HVAC systems while avoiding the energy penalty of increased ventilation. However, I've also heard that ionizing equipment is dangerous because it produces ozone.

Does anyone have any insight into the effectiveness and/or cautions... Read more

Hi all,

I wanted to reach out to fellow MEP energy modeling teams to assess everyone's experience with the new PCI calculation methodology in 2016. It was a substantial change in how we show savings on projects. Big changes can often come with un-intended consequences. I'm all for pushing to higher efficiency - just want to make sure we... Read more

Well done and rivhly deserved, brother.  That makes you a Fellow Squared.

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to be... Read more

Consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur... Read more

Hello Sustainable Community Design Leaders,

The SDL Winter Summit (Jan 23-25, Tempe AZ) has a few spots still open, so we are excited to invite SCDL members to join! This is an opportunity to plug into the conversations happening in the Sustainable Design Leaders group, plus a possible chance to carve out some in-person SCDL time.

I am looking at having staff members take a materials course and deciding between Parsons Healthier Materials and AIA Materials Matter certificate programs. Does anyone have feedback on either? Bonus points if you know about both and can provide a direct comparison. Thanks!

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Welcome to the quiz portion of EPDs Are the Future of the Building Industry, Whether You Like It or Not.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how environmental product declarations (EPDs) are made, what they tell you, and how they're best used.
2. Describe... Read more

We have a client thats going through a TI remodel in a building thats a LEED Core+Shell certified building. One of the questions we are trying to figure out is are there things we need to be doing to not imperil the building's certification. 

I think the answer is that the landlord had to write tenant guidelines at the time of... Read more

Hi folks,

We’re working on the agenda for what’s shaping up to be a really awesome Summer Summit at a great new venue in Massachusetts. There is an awesome group already registered, and we’d like to fill the remaining slots soon so that we can develop the agenda with your input.

If you’ve been planning to register, please do it... Read more

Hello Green Gurus,

Here is the information for this month's Peer Networks Webinar, Making the Case for Equity with Data: a Free Tool for Project Teams. We hope you will join us!

Register HERE.

Making the Case for Equity with Data: a Free Tool for Project Teams
Tuesday, July 27th, 2021
1pm - 2pm ET (10am - 11am... Read more

Hi folks,

Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:

Thursday, July 18, 2pm EDT (11am PDT)

The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more

Hello all, 

Many of you have been asking about the CC reporting template for 2023 projects. It is still in-progress, but we can promise a huge upgrade from the past couple of years. In particular, the new template is designed for ongoing project tracking over the course of the year (rather than purely documentaion after the fact).  ... Read more

I see Kjell Anderson, Mary Ann Lazarus and Daniel Overbey as the Green Gurus on this list - if i missed anybody apologies.

Congrats all around folks!

https://www.usgbc.org/articles/gbci-announces-2018-leed-fellows 

Hello Sustainable Advising Leaders,

Here are the notes from the last Zoom call. We had a great turnout! Looking ahead, now that things are rolling along we’d like to get into the rhythm of a regularly scheduled monthly call. Since Tuesdays seem to work well for most people, I am proposing the 4th Tuesday of the month from 3-4pm ET. That... Read more