Please see the following invite from Professor Alexandra Rempel at the University of Oregon to participate a 15-20 minute phone/Zoom interview and share your experience and/or perceptions on the problems, challenges, and barriers to incorporating into your projects.

This effort is part of an NSF research grant that I am involved in and... Read more

tate 

A draft of AIA’s Top Ten Toolkit was just published!

http://bit.ly/COTEtoolkit

Hopefully useful for everyone toward making more very high performance buildings. More updates to come, including interactive tools like a superspreadsheet. 

All the best,

Tate

Sometimes referred to as “the dark side”, the construction industry isn’t actually so bad.  We are mostly good people.  And, we need good people. 

Consigli is hiring a Sustainability Manager to work in Massachusetts, and we could use your help to fill the role.  If you or someone you know is brimming with the sustainability force, please... Read more

People tracking pollutants and dirt into buildings can cause indoor environmental quality (IEQ) problems, increase maintenance costs, and reduce the life of the floor. When they track rain and snow on hard surfaces, it increases the risk of personal injury due to slips and falls.

BuildingGreen-Approved Track-Off Systems

... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

Hey, team. Would it be possible to get premium access to LEED User while we're developing the best practices resources? (without subscribing to it- I don't LEED consult any longer)  Southface has basic membership, so I can't see what's available, etc. Thanks.

Hello Green Gurus! We are diving deep into our carbon metrics this year and are finalizing some of our emissions factors for our Scope 1 and 2 emissions and in a few more months Scope 3. I'm hoping this brain trust has some recent knowledge to share on this topic. What we've found is there's a fairly big variance in what we've seen in published... Read more

Welcome to the quiz portion of Retrocommissioning: Big Savings for Big Buildings.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define the term retrocommissioning.
2. Explain how whole-systems RCx differs from energy-focused RCx.
3. Describe several examples of how... Read more

Hi Folks, anyone in Boston (or willing to move) this could be a super cool opportunity for you! 

https://careers-bpda.icims.com/jobs/1557/senior-resilience-design-reviewer/job?mobile=false&width=805&height=500&bga=true&needsRedirect=false&jan1offset=-300&jun1offset=-240

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

Welcome to the quiz portion of Net-Zero Water and More: Moving Beyond “Low Flow”

Learning Objectives
Upon completing this course, participants will be able to:


1. Define net-zero water.
2. Describe the role of utilities in water efficiency solutions.
3. Explain the water-energy nexus and the water-... Read more

It may take hundreds or thousands of years to return to pre-industrial-age levels of atmospheric carbon dioxide, but the loss of animal and plant species that is occurring today is, practically speaking, irreversible. It will take millions of years for evolution to fill the ecological niches being vacated by extinctions and restore healthy... Read more

Charlotte has been the lead customer service representative at BuildingGreen for 25 years. 

Having been involved in the nuts and bolts of customer service and accounting throughout various phases of the company’s development, Charlotte’s historical knowledge is immensely helpful to BuildingGreen’s staff and customers. Customers know her... Read more

The Sages network is specifically for industry veterans and long-time Peer Network members, including those who are still active with one of the other networks and those who have moved on from that role. This group can help set priorities, drive advocacy, and... Read more

Hello,

We are in the very early planning phase of a k-8 public school project to be designed and built in an economically challenged urban location with very limited site options. The project is not LEEDv4 registered yet.  We are at feasibility and costing the soil remediation, needless to say that we would really hope there would be... Read more

Join our free Coffee Talk with Alex Spilger to discuss the latest WELL AP v2 exam. Hear what's new in this latest version, what to look for, and what to remember.

Alex combed the WELL Building Standard reference materials and took the v2 exam in writing an extensive exam prep guide.  Hear about... Read more

Hi All - I wanted to share out the All For Reuse initiative below by two peers in the sustainable materials management network. I know some SDL have already done much research on this from quite a few angles, and those with LBC experience probably even moreso in practice. 

Frances Yang (Arup) and Andrew Ellsworth (Doors Unhinged) have... Read more

Hi all,

AGC is the biggest umbrella organization for general contractors in the states. To date, there has been practically no interaction between the SCL and AGC. In my mind, the SCL group is the most knowledgeable group of dedicated sustainability professionals out there; so is there a way that we can partner with AGC to collaborate ... Read more