Explainer
Product Review
Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more
Product Review
To the best of our knowledge, this product is now being marketed under the name Rauhsaser by Better Wall System of Kenora, ON.
CoverAge is a tacky name for a great product that all remodelers should know about. It is a paintable, textured wallpaper that’s made entirely of recycled paper (at... Read moreNews Analysis
EBN Advisory Board member Mike Nicklas led an international delegation of renewable energy experts in promoting sustainable energy at the Earth Summit last month. He and others were negotiating for inclusion of renewable energy and energy conservation measures into agreements being worked out for the United Nations... Read more
Explainer
News Analysis
The City of Austin’s Green Builder Program was one of 12 award recipients in the United National Local Government Honours Programme at the Earth Summit in Rio, and the only winner from the United States. “The purpose of the Honours Programme is to recognize innovative local approaches to... Read more
Feature
Carefully stake the building site and driveway, remove trees that are within the excavation area or too close, then erect a fence to keep heavy equipment off fragile soils and away from nearby trees.
Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:
•Enhancing comfort by shielding the house... Read more
Feature
Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more
Op-Ed
Introducing the first issue of our newsletter.
Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more
Feature
Susan Maxman is the first AIA president to make sustainable design a priority.
Q.Where would you say architects as a group stand on environmental issues?
A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more
News Brief
The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more
Forum topic
Hello SCL,
We are getting back to our usual schedule of a pre-Greenbuild SCL Summit. We will be opening registration and announcing topics shortly. In the meantime, please pencil us into your calendar.
Date: September 25, 2023
Location: ZGF Architecture 600 14th St NW #800, Washington, DC 20005
Time: Soft start at... Read more
Forum topic
Green Gurus –
Clark Brockman brought to our attention an important and impactful opportunity to advance building decarbonization through the US Department of Energy’s proposed rulemaking around water heater efficiency, advancing adoption of heat pumps, while still providing exceptions (and efficiency targets) for electric or natural gas... Read more
Forum topic
Received answers from below questions from NIST Andy Persily
1. Is there a preferred bookends range of CO2 for both “optimal” energy and human performances?
Andy: No
2.Is the ASHRAE ventilation of 1000-1200 ppm average, probably not based on performance, suggesting current ventilation rate is sub-optimal with cognitive... Read more
Forum topic
Michael led Opsis through several workshops as we began our journey to create a more equitable and socially just workplace. Michael had a great sense of humor and a really kind manner. I feel deep gratitude for having known him and for the lasting impact he has had on our lives. I know others in this group also worked with Michael and would... Read more
Forum topic
Team,
As you all probably saw, Boston is discussing using both CEI (carbon emission intensity) and EUI as basic scope of work. Maybe the more surprising thing is China announced a new building code next year to include carbon emission analysis as a basic scope of work for all buildings. New buildings in 2022, among other things,... Read more
Forum topic
Hello All,
Through a regional School of Architecture, our firm has been connected with a very intriguing startup that has been engineering a new rooftop wind energy technology. They are developing a system to economically capture the increased wind flows at the edges of commercial building rooftops. They have engineered this system,... Read more
Forum topic
Hi MEP Leaders,
We had a great conversation in our last monthly call about the function and purpose of this group, and what we can best do together. You can see detailed notes from that call here. And we'll soon be sending out a reminder about the October call (Tuesday, Oct 8, 2pm eastern).
One of the ideas from that conversation... Read more
Forum topic
Congratulations on the site launch! One problem, though... you appear to have overlooked the home page orientation video. Currently there's just a placeholder image that doesn't actually do anything. Did your team end up producing a BIT User video?



