BuildingGreen Report

Feature

Susan Maxman is the first AIA president to make sustainable design a priority. 

July 1, 1992
Interview with Susan Maxman, President, AIA 20 June 1992

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

Feature

Carefully stake the building site and driveway, remove trees that are within the excavation area or too close, then erect a fence to keep heavy equipment off fragile soils and away from nearby trees.

July 1, 1992

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

News Brief

July 1, 1992

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Op-Ed

Introducing the first issue of our newsletter.

July 1, 1992
Welcome to Environmental Building News

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Forum topic

Hey Gurus. Might anyone have experience, or thoughts, with regard to establishing an energy use baseline for a new advanced manufacturing facility we are working on for a regional technical community college? This type of academic facility is so relatively new, the program doesn't fall into the typical "College/University" building type from ... Read more

Forum topic

Short notice – apologies in advance.

Please review the new Guide following the instructions on the first page of the attached draft and using the attached spreadsheet. Comments will be accepted until February 16th at noon EST

Use the Excel spreadsheet to compile your comments if you have any, and return them to me by Feb 15th COB... Read more

Forum topic

Hi folks, 

A few of us at SERA recently connected with a couple of women in the tech industry who are looking to solve sustainability issues with new software. They're in the "problem definition" phase and are eager to hear from SDL members about the big issues around operational and embodied carbon that we're tackling. See below and... Read more

Forum topic

Please see the following invite from Professor Alexandra Rempel at the University of Oregon to participate a 15-20 minute phone/Zoom interview and share your experience and/or perceptions on the problems, challenges, and barriers to incorporating into your projects.

This effort is part of an NSF research grant that I am involved in and... Read more

Basic page

Meet the winners:

2024
2023
2022
2021

Forum topic

Hello,

Are you aware of any bldg codes that have included requirements related to Material Health?

Thanks!

Mona Lemoine Architect AIBC, MRAIC, LEED AP BD+C, LFA, Regenerative Practitioner, RELi AP

Associate, Senior Sustainability Consultant

Mobile: 236-878-1752
mona.lemoine@stantec.com

Stantec... Read more

Forum topic

Hi Folks, anyone in Boston (or willing to move) this could be a super cool opportunity for you! 

https://careers-bpda.icims.com/jobs/1557/senior-resilience-design-reviewer/job?mobile=false&width=805&height=500&bga=true&needsRedirect=false&jan1offset=-300&jun1offset=-240

Campus-wide Group

Forum topic

If you have a moment and are working in the IAQ arena, please consider filling out this survey, and you could also win an AirGradient ONE monitor. (Check my review video here: https://www.youtube.com/watch?v=NpqYOWLzv7o) 

https://forms.gle/ytLcq2dvtGrD2UZY7

I also have access to the results and will happily share the data whenever... Read more

Forum topic

We've gotten some requests recently, so it must be time to update our salary survey. For those didn't participate in the past, we last did one in 2015, and collected some really interesting data about compensation for SDLeaders.

Our first step in getting this started is to recruit a few volunteers who are interested enough in the data we... Read more

Forum topic

Hi all,

I wanted to reach out to fellow MEP energy modeling teams to assess everyone's experience with the new PCI calculation methodology in 2016. It was a substantial change in how we show savings on projects. Big changes can often come with un-intended consequences. I'm all for pushing to higher efficiency - just want to make sure we... Read more

Forum topic

The Resilient Outcomes Working Group grew from a session at the 2020 Winter Summit in Gulf Shores AL, and we are still going strong.  We are currently focused on three primary objectives: 1) bringing awareness to resilient design through a presentation at the GreenBuild 2024 Resilience Summit (we'd love to see some peer network friends at our... Read more

Quiz

Welcome to the quiz portion of What’s New in Multi-Attribute Environmental Certifications.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Describe several styles of multi-attribute certification.
2. List a benefit and a downside to both point-based certification programs and... Read more

Quiz

Welcome to the quiz portion of Driving to Green Buildings: The Transportation Energy Intensity of Buildings​​!

Learning Objectives
Upon completing this course, participants will be able to:


Define “transportation energy intensity” as it relates to buildings and understand its impacts on the environment, human health, and... Read more

Forum topic

We are attempting to use Tally on a couple projects and are wondering how others are using the tool in their design process. If any experienced users out there would be willing to have a brief phone conversation I would appreciate it. Thanks