Hi All, this is primarily directed at our Sustainable MEP folks, but please anyone with insight feel free to weigh in.

I am increasingly seeing designs and specifications asking for Passive House levels of airtightness as verified by blower door testing, but with traditional ventilation system designs. 

To me, Passive House US has... Read more

Welcome to the quiz portion of Reexamining Priorities in Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define green building priorities from a few different angles (separating process priorities from outcome priorities).
2. Differentiate those priorities... Read more

I'm sure if I hop in the way back machine I could look in the forums and find old threads on LEED GA and LEED AP study resources, but I also know that material comes in and out of date. Has anyone found a good, current solution for firmwide LEED study materials?

We used to have some GBES resources, but those are intended to be person-... Read more

Meet the winners:

2024
2023
2022
2021

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Welcome to the quiz portion of The Beneficial Intersections of Energy, Resilience, and Health.

Learning Objectives
Upon completing this course, participants will be able to:

1. Determine and communicate the financial benefits of energy efficiency, climate resilience, and occupant health and wellness.

2. Understand how... Read more

Congratulations to Mara Baum (HOK) and Alison Kwok (U of Oregon), FAIA! 

AIA announcement

As part of the Philadelphia AIA COTE, we have been proposing implementing sustainability in some fashion into the design awards with our chapter's design committee.  I know that many of you have been down this road before, and wanted to get your feedback at a high level about what your local COTE is doing.  Anyone who's interested, can you... Read more

Hi Everyone, 

Has anyone had success in finding organizations or programs that will recycle the hard hats? We are looking into options for recycling our expired hard hats that can no longer be used. Ideally, we would want to use a company with facilities across the country but we are open to any suggestions or ideas you all may have.... Read more

All,

I recently met Sahil Tadwalkar who is a Stanford MS Candidate in Civil Engineering. He and his group are interviewing design and construction industry professionals to understand issues and challenges around specifying and using low carbon solutions on projects. Interesting stuff! I encourage you to contribute by setting up an... Read more

Welcome to the quiz portion of Natural Ventilation: The Nine Biggest Obstacles and How Project Teams Are Beating Them

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the primary reasons to design a building for natural ventilation.
2. Understand how cost, comfort... Read more

Hi everyone - we have a new higher ed client who is committed to sustainability but not very knowledgeable about current topics such as carbon (both embodied and operational) or the electrification of buildings.  I need to educate them and would like to start with some easily-digestible background reading.  But as we all know, we're a bit dorky... Read more

For consideration in determining CM "Greenness", are we leaders if we wait for city ordinances?  can we collectively agree/adopt a standard?

and for those of you in this market, how is this being received and implemented?

https://www.portlandoregon.gov/bps/article/701085

Multnomah County, City of Portland commit to reducing... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor? 

Hi Everyone!  About ten days ago, Megan Zack posted a note announcing her new role as Chief Sustainability Officer at Wight & Company. (Yay!)  I'm so delighted that she will be stepping into this leadership role at Wight to shepard the firm in the next chapter of their journey in sustainability. 

I wanted to take a moment to say... Read more

I'm sure most (if not everyone) is aware that LEEDv5 is under public review until May 20, 2024. I know I need to make time to flip through it, review, and comment, but I'm having a heckuva time protecting the time in my calendar to do that. Anyone interested in joining me for a 60 - 90 minute meeting to do this together as an accountability... Read more

Team,

https://www.buildingservicesengineersdeclare.com/

See link above, a group of UK building services (MEP) engineers (like us) signed on above, committed to do life cycle carbon (including embodied MEP) in their work.

Are we behind?  Should we match them?  leap frog ahead of them?

Best,

Luke Leung