Hi everyone, 

We’re so excited to announce that registration for the first-ever “Summit for the Sages” is live! Register here and save your seat to join BuildingGreen, your Sages peers, and members of all three other networks in Omaha this Summer.

If you are in Sages and SDL and want to attend both summits, please check the “SDL... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hello All, I've a quick question. I am looking for a few potential subject expert speakers on the topic of the Circular Economy. Any suggestions out there? 

All thoughts are appreciated.

Rand Ekman

We are working on a large, commercial, LEED project in the Wash DC area, and the Construction Management firm needs LEED administrative/documentation assistance on their end of the process.  The construction is underway but the CM lacks the staff. 

Can anyone suggest a LEED consultant in the DC area that can work for the CM -- managing... Read more

Hi All! 

We have had a few multi-family projects consider this single package vertical unit with integrated ERV, but we haven't pulled the trigger for fear of the unknown. Our local engineers aren't sure how it actually performs and worry it may not meet code requirements for separation between exhaust and intake. Has anyone else used... Read more

Hi all, 

The San Francisco Department of the Environment is hoping to gather info from designers and specifiers about construction surplus materials. Their survey is 8 questions total and not limited to those in the SF area. 

Pasting info below if you have a chance to participate! 

Calling Designers and Specifiers:

... Read more

On Thursday, September 27 at 2PM Eastern Time you can join the first BuildingGreen Communities webinar where we will share key takeaways from the 11th annual Summer Sustainable Design Leaders Summit (@ the Garrison Institute in upstate New York). Our new webinar format using Zoom will allow for interactive questions and comments throughout. If... Read more

Hi folks,

BSR/ASHRAE/ICC Standard 240P, Quantification of Life Cycle Greenhouse Gas Emissions in Buildings, is out for Public Review until March 18. It covers what construction activities have to be tracked and reported and provides placeholder values to use during design. If you have input or suggestions on what would be needed to make... Read more

Want to make sure those in Portland are aware of a couple of LF18 Ramp-Up Events happening on April 10th. 

Introduction to the Living Building Challenge (presented by Kathleen Smith)
https://living-future.org/events/introduction-to-the-living-building-challenge/

Incentivizing Living Buildings in Portland 
https://... Read more

Hi all, hope you're keeping safe and healthy. I'm thinking about protocols to put in place on jobsites related to COVID-19 in addition to our IAQ plans. Wondering if anyone's company has started to layout specific protocols, PPE, etc. and is willing to share.

What got me thinking was this article from Prof. Joe Allen at Harvard about... Read more

Hope I'm posting this in the right place.  I have a client who's interested in estimating the embodied carbon of multiple buildings (primarily apartment buildings) they own and operate.  Not sure if I'll have access to drawings or area takeoffs of materials for their buildings.  How would you approach this?  Would appreciate input on resources... Read more

Hi! Just saw this White House press release stating that federal suppliers will need to report on scope 1 & 2, and relevant scope 3 emissions and climate-related financial risks as well as set science-based emission reduction targets. The cutoff for disclosure requirements is $50m in federal contracts. Curious whether this affects any... Read more

Welcome to the quiz portion of Seal, Tape, Gasket: A Sticky Search for Better Materials.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose the best means of achieving barrier continuity for any given application.
2. Assess a joint sealant's service life and product... Read more

Hello everyone! I’m happy to be re-joining the group after a two year hiatus.

Pre-pandemic I got to participate in a few winter summits when I was Sustainability Director at Overland Partners in San Antonio. I’ve recently joined Mahlum Architects in Portland and I’m excited to re-engage in the conversation, this time from the West Coast... Read more

Hi all, 

Thank you again to those of you who attended the Summer 2024 SDL Summit! We had an unforgettable few days of learning from one another, including from our presenters.

The slides for the 5-minute presentations are below, as well as the BuildingGreen slides from the Summit. Please be aware that we have permission from all... Read more

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more