Has anyone used a commercial heat pump water heater for a large protect?  I have found a few manufacturers for this technology, but want to make sure this is a viable and cost approach to electrical eliminate gas on a path to all electric.

Hello Green Gurus,

Here is the information for December's Peer Networks Webinar, Architects in the Blue Zone: The AIA at COP26. We hope you will join us!

Register HERE

Architects in the Blue Zone: The AIA at COP26
Wednesday, December 15th, 2021
4pm - 5pm ET (1pm - 2pm PT)

Description

The American... Read more

Reminder: For anyone interested in continuing to participate in the Climate Smart Wood Working Group, please note that we have joined the other CSWG and will have our first meeting next Wednesday.  Visit the Working Group page for the meeting invite and agenda.

Rotary Uninterruptible Power Units

Power interruptions and brief changes in voltage can damage electrical equipment, compromise computer data, shut down manufacturing, and endanger hospital patients. In the case of power outages, generators usually take over, but about 98% of all interruptions last less than ten seconds, and there is a... Read more

Welcome to the quiz portion of Doing Daylighting Right.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain occupants' needs and habits when it comes to daylighting.
2. Recognize at least three recent mistakes in daylighting design and their respective alternatives going... Read more

All,

We are collecting examples of buildings that involved electrification initiatives (building does not need to be all electric as long as largely electric). Please share your projects with us through this short survey. It will take 8-10min to complete.

The study will culminate into a report and best practices to advocate for... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

B-Boy Newsy

Hi all - back in May I asked you for help reviewing our series ahead of publication. The first 5 posts are up, with the 6th a day or so away. Thanks to everyone who has helped out! 

It's a fail-forward effort to help us figure out what we are missing in our climate action on our projects and advocacy. Enjoy, and let me know if and how... Read more

Hi MEP Leaders,

Just a reminder that our monthly call is next Tuesday, July 11, at 2pm ET. Chris Colasanti will be presenting on impacts of different facade characteristics on overall energy performance! 

All Network members are welcome to join. Here is the agenda, and below is the Zoom info:

Join Zoom Meeting
https... Read more

Hi all,

Our team has been working hard to wrap up this year's SCL Summit Report, and we're excited to announce that it is finally complete!

https://docs.google.com/presentation/d/1zcSPctZ1BiyPQomiw4wTQLajR816mm3KJV0BL5B14-0/edit?usp=sharing

In addition to the usual summary of key points from the summit, this report captures... Read more

Hi everyone, 

We’re so excited to announce that registration for the first-ever “Summit for the Sages” is live! Register here and save your seat to join BuildingGreen, your Sages peers, and members of all three other networks in Omaha this Summer.

If you are in Sages and SDL and want to attend both summits, please check the “SDL... Read more

Hello Green Gurus!

The Climate Smart Wood Working Group would like to give a boost to this Ecotrust initiative to support the market proliferation of mass timber with science that attributes carbon impacts to wood building products. As many of you are aware, a couple years ago, the University of Washington partnered with Ecotrust to... Read more

This webinar took place on Tuesday, October 27 2020 “We can’t build sustainable buildings without sustainable products” –Nadav Malin.

If you don’t spend your “day-to-day” in the healthy materials space, it’s hard to create strategy and align your company to meet your customers' (what seems to be) ever-changing asks and project goals. This... Read more

Hello lovely Green Gurus. Hope you all are well. I am wondering if anyone has installed an indoor sports floor that performed well and is low-emitting. This is for a multi-purpose gymnasium at a community center. Any chance?  Thanks All!

Hi Green Gurus,

A "fun" take-away from the sustainable MEP Leaders Summit (just ended today):

Inspired by Passive House, we are embarking on a campaign: "Low Load Buildings Are SEXY".

One idea we have is:  what if the AIA design awards set limits on metrics like heating loads to meet basic eligibility?

If you have... Read more