Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

For those of you who have attended the event above, I think you will agree this has been a high quality event.  But DFC is changing the forum this year. Instead of holding an annual event in September, this year they are holding 4 half day events around the country.  Attendance will be limited to 40 people and it is focused on sustainability... Read more

Hi all,

As follow-up to the summit, I’m attaching a draft letter on MEP embodied carbon written by our group (Luke, Kristy, Adam).  The goal is to start a dialogue with manufacturers to include embodied carbon info for major equipment.  Will explain more on the call.  Please read in advance if you get the chance!

Thanks!

I read a very misleading article on the AIA's website today regarding antimicrobials and the benefit of microbicidals in paint. It was written by a manufacturer, not a healthcare professional, and was not obviously labeled as sponsored content on the website. (I received the link in an email, which did label it as such).

https://www.aia.... Read more

When BuildingGreen started publication in 1992, simply finding building products designed with environmental benefits in mind was a big challenge. 

In the years since we’ve seen rapid advances in green building materials and products, and manufacturers are beginning to take topics such as embodied carbon and social justice concerns—... Read more

What better way to follow up the magic of a live presentation from Peter Yost than with 15 free days of BuildingGreen Premium?

Our firm was asked by a government client in Canada to update their specifications for concrete to capture low embodied carbon as a performance metric. From the SDL group's knowledge of concrete procurement:

ASHRAE posted this year's list of honors and right there at the top of the list is our SMEPL colleague, Cindy Cogil - now able to add FASHRAE to her signature block!  Well done, Cindy and congratulations to ASHRAE for recognizing your accomplishments.

Welcome to the quiz portion of The BuildingGreen Guide to Insulation!

Learning Objectives
Upon completing this course, participants will be able to:


I'm going way outside of my skillset and comfort zone...venturing into HR territory to do an analysis of my company's benefits package to see if it meets exceeds or falls short of the requirements of Fitwel and WELL. Has anyone else done this within their organization? How was this received by your company's executive team?

When... Read more

Hi SDL Group - 

Our firm has been presented with a potential opportunity to share with USGBC National Representatives details about a few of our voiced concerns in the context of specific project administration efforts.

For us, these relate to two specific factors:

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

Hi: I'm writing to share a unique opportunity to make a difference at SCALE as a Sustainability Manager at Amazon Global Services.

This comes from Lisa Matthiessen, FAIA, LEED Fellow who some of you may know. Lisa just joined Amazon's Worldwide Sustainability Team who is charged with making real their Net Zero for all operations by 2040... Read more

Is anyone else working on a project doing Living Building Challenge v4.0 Energy Petal? We're working through the Imperative 08 Net Positive Carbon Resiliency Strategy requirements that ask for the project to be habitable for a week in the event of an emergency. We're curious how others are defining "habitable" and what systems assumptions... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

Hi everyone,

Happy new year!

The FIRST First Friday Fika* of 2024 is happening this Friday, January 5th from 11am to 12pm ET, hosted by Candace Pearson.

Here is the registration link for the Fikas, or if you've registered previously, you can use the same link for this week.

We look forward to seeing you Friday!

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel