Greetings, Green Gurus!  As many of you know, I teach a course at the University of Pennsylvania's Graduate School of Architecture, and one of my former students has just graduated from their and MS in Design - Environmental Building Design program.  She is looking for employment at a firm that has a focus on sustainability.  Unfortunately we... Read more

Does anyone know of a good summary of state and local energy code adoption for new building and ordinances for existing buildings? I know of this energycodes.gov site, but it feels somewhat misleading when you dig into it. For example, in CO, it suggests there is no min code, but there is, and it doesn’t show the extent to which local govs are... Read more

Has anyone had any success with achieving the LEED Building Envelope commissioning points with an alternative compliance path using the requirements of the PHIUS verifier? It seems like an unnecessary duplication to ask the client to pay for a BECx agent and a Passive House verifier. Or am I missing something? I can't find any LEED... Read more

Please share this info with any contacts you have that you think would be a good candidate for our Design Performance Coordinator position -- Thanks!

Design Performance Coordinator in San Antonio

I suspect that some of you have already seen this or already signed it, but just in case, for your consideration:

Add your voice to the powerful chorus for climate policy and sign the LEAD statement.

More than 500 sustainability professionals have now signed, and the number is growing! 

To learn more about this: please read... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hi All -

I'm wondering if any of our SDL people have a project case study on designing for deconstruction that they'd like to present on? I know there are a lot of conversations that we should be designing for deconstruction but has anyone done a focused project?  Thank you for any input you might have.

Hi All,

I will be catching up on learning units over Thanksgiving weekend and I am wondering if anyone else is experiencing the challenge of credential maintenance of their CPHD? Ideally we would have a client go for Passive House accreditation on a project, but lacking that, how are folks maintaining their 20 credits per year? For... Read more

Hi All,

I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more

Welcome to the quiz portion of Raze or Retrofit? Six Extraordinary Answers to an Everyday Question.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand how the embodied impacts of renovation compare to those for new construction.
2. Provide three reasons why building... Read more

Hi! I'm writing a short news piece on WELL v2 and looking for someone very familiar with the existing and v2 standards to interview about the changes. If you meet that description and would like to go on the record with your thoughts, please reply to me directly at paula@buildinggreen.com. Thanks!

Happy 2021 Green Gurus,

BuildingGreen has some New Years news to share with you all!

Announcing an addition to the Peer Networks family, we are excited to be launching the Sustainable Community Design Leaders (SCDL) Peer Network!

The SCLD peers are planners, architects, landscape architects, and other professionals at... Read more

Hi All -

With the holidays coming up and budgeting for 2023 - do we have any information on when and where a mini summit will be?  I heard rumors of Arizona?  Hoping to come but need the info as soon as I can.

Hi All

I'm wondering if any of you know how to track the GWP for materials that do not have an EPD?  I'm trying to do a carbon comparison on batteries but neither one has an EPD that I can find.  Thanks for any guidance you may have. 

You know all those times when you want to reply privately to someone, but don't have their email address handy? What a pain, right? 

Not anymore! Now you can go to the "Group Members" tab on the BuildingGreen Communities forum page, and hover over anyone's name to see their email address. 

Only members of the forum can see your... Read more

Moseley Architects is currently looking to hire a Director of Energy Analytics and Informed Design.  This is a fast paced and exciting position at an A/E firm with offices in Maryland, Virginia, North Carolina, and South Carolina.  The ideal candidate will have a passion for data, innovation, and problem-solving, along with experience providing... Read more

World: There is no way we can shut down in order to lower emissions, slow climate change and protect the environment.

Mother Nature: Here's a virus. Practice.

Who is measuring the positive environmental impact our actions are having on the environment? 

For example, there have been reductions in air pollution. If the... Read more