Hi All, this is primarily directed at our Sustainable MEP folks, but please anyone with insight feel free to weigh in.

I am increasingly seeing designs and specifications asking for Passive House levels of airtightness as verified by blower door testing, but with traditional ventilation system designs. 

To me, Passive House US has... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Greetings Gurus!! I'm super excited to invite you all to help each other :)

As many of you know, BuildingEase (a completely free tool!) has been born this year, the newest function we just launched is the Crowdsourcing function.

Crowdsourcing lets anyone contribute products to a public Material List (similar to an Outline Spec)... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

Dear Green Gurus,

I both regret and am excited to tell you that I am leaving this group to pursue my next adventure.  I'm stepping down as Kirksey's Director of Sustainability, moving to Tucson, and starting my own business.  My business plan is to buy existing buildings, renovate them to net zero, and then sell or rent them.

I... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

This one-hour crash course will review the concepts and key facts within the WELL Building... Read more

Dear SDL community,

I am supporting one of our health authorities in developing a business case for regenerating healthcare infrastructure as part of the indicative design for a new hospital and cancer centre. While I will be deepening this inquiry through the lens of a PhD over the next few (hopefully 4 or less!) years, I - and we - are... Read more

Hi SD Leaders: I'm writing to get your help identifying any experts or projects where all-electric HVAC solutions are being implemented in a large new build healthcare/patient care setting. The client has raised concerns about the reliability of an electric re-heat system and its ability to promptly respond to temperature controls. They also... Read more

As with window and glazing products, the energy performance of skylights and roof windows varies greatly among different products and should be carefully considered.

BuildingGreen-Approved Skylights

BuildingGreen approves products that feature advanced thermally broken frames that dramatically reduce thermal bridging and improve... Read more

Ace Brockwell

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

I am very interested to understand the deployment of LED temp jobsite lighting on a national level.  I think this all goes back to the low emitting jobsite.

1. Does your firm utilize temp jobsite lighting on your projects?  

2. Is this every project or a percentage of projects?

3. In your state or area is it prevalent, one... Read more

Use BuildingGreen campus-wide to integrate the latest innovative building technologies into course content.

As you might well remember, one of the Working Groups that came out of the SummitPalooza earlier this year was for MEP Embodied Carbon & Refrigerants.  That Working Group began working with the Carbon Leadership Forum and is now excited to announce the rollout of the MEP 2040 Challenge: “All systems engineers shall advocate for and achieve... Read more

Welcome to the quiz portion of Better Choices in Low-Slope Roofing.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain life-cycle impacts, health and environmental hazards, and durability of low-slope roofing options.
2. Classify situations for which reflective roofing... Read more

Is anyone planning on attending the WELL Conference in Scottsdale in March?  I'm trying to figure out if it's worth attending or not?