Forum topic
...for all the folks on the west coast.
It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters.
https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/
This PSA is from our friends at NEEA (... Read more
Basic page
The Sustainable Design Leaders peer group brings together the most committed sustainable design directors from leading architecture firms throughout the U.S. and Canada. We invite you to apply for membership.
We look for the... Read more
Product Guide
CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.
Water and air that penetrate building assemblies can damage materials, cause energy loss, and lead to mold, mildew, or other problems. The products used to address these may contain materials that are... Read more
Forum topic
Hi All,
Attached are the meeting notes from the Carbon Group's 2/26/20 -- also in the PDF are the slides presented in the 2/26 meeting.
Before our next meeting in late March/early April, we are looking for input on the following topic related to tracking and reporting carbon:
Building the business case / Case Studies from... Read moreForum topic
Folks,
In case any of you enjoy the Phoenix weather, I wanted you to be sure to know that our company, Sundt, which is headquartered here is looking for a sustainability director to lead up our efforts. This comes after two years of work and hiring a consultant (Brightworks out of California) to help us prepare and take the next steps. I... Read more
Quiz
Welcome to the quiz portion of Fundamentals of High-Performance Building Assemblies.
Learning Objectives
Upon completing this course, participants will be able to:
1. Recall how the acronym ENDURE speaks to the unifying aspect of high-performance buildings.
2. Describe how to apply the principles of high-... Read more
News Analysis
* This gets complicated -- how much should happen on the dashboard and how much should happen in the actual Discussion forum?
Hold off on discussions for Phase 1. What should be here instead for... Read more
Forum topic
I'm sure we'll learn more soon, but several people have asked on various platforms about how Betsy del Monte is doing (she lives in Asheville, NC, which was hard hit by Hurricane Helene).
I had a brief text exchange with her on Saturday 28 September, and I feel sure that she would be OK with my sharing it with you all:
We’re... Read more
Forum topic
Extremely proud to say that the just-announced winner of the international 'Next Generation Facade' design competition is a team led by the 2017-18 EDR Research Fellow, Liz McCormick. The facade normally separates inside from outside. What if the 'facade' was a place you occupied, where you worked? What if different parts of the facade... Read more
Forum topic
Hi all,
We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more
Forum topic
Dear all,
A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?
"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more
Forum topic
I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more
Author
Forum topic
In trying to help a client write a case study on avoided carbon by using slag and flyash, I am having trouble finding a one for one equivalency that can be verified.
I have found for one pound of flyash, one pound of carbon is saved - but I can't verify that.
Appreciate the feedback!
Forum topic
Has anyone worked with Vidaris for LEED certification and have a contact there? If you want to direct email me with feedback on the experience that would be helpful as well.
Forum topic
Hi all -
I have heard a good deal about SBTI in the last while and am wondering about this group’s firms’ engagement with them. We reported one year through CDP, and it was not very useful. It focused entirely on Scope 1 and 2 emissions, which are over 1000x times less than our semi-controllable Scope 3 (buildings’ embodied carbon and... Read more
Reports, Courses, Study Guides, Live Webinars
This webinar occurred Thursday, December 15.
Attendance confirmation closed Friday, December 30.
Whether it’s the flooding in Pakistan, the devastation caused by Hurricane Ian in Florida, or the record-breaking wildfire season in Europe, climate change is in the news daily. Just as there’s an urgent need to reduce... Read more
Forum topic
Hi All,
I wanted to share a program of superstars including many of you. I look forward to electronically connecting and learning together.
Every Monday from June through August, the Boston Society for Architecture (BSA) and the Carbon Leadership Forum (CLF) Boston Hub will present Embodied Carbon 101, a 12-part program series in... Read more