Dear SDL,

After almost 12 years at Sasaki, I have finally decided to leave for a path slightly-less-traveled. My own development project in Boston (passive house, ZNE condos) is in construction and I will be focusing my attention on that over the course of this year, and then hoping to continue doing similar integrated... Read more

We are working on a large, commercial, LEED project in the Wash DC area, and the Construction Management firm needs LEED administrative/documentation assistance on their end of the process.  The construction is underway but the CM lacks the staff. 

Can anyone suggest a LEED consultant in the DC area that can work for the CM -- managing... Read more

Hi Fellow SDLers: I'm writing to share intel about two recent climate change articles that provide links to some great new resources:

1. From the AIA Trust: An excellent article in this month's AIA Trust Newsletter on "Climate Impact on Professional Liability." This includes links to some useful resources including the new AIA Hazard and... Read more

I'm so excited to share that the call for submissions is now open for 16cubits, a design festival and competition for the Jewish holiday of Sukkot, to take place at Berkeley’s Urban Adamah in October 2024.

Please share with anyone you think might be interested! Our hope is to create a forum for builders, designers, and architects to... Read more

Hi SAL friends,

As some of you have heard by now, we've decided to shut down this Peer Network.

After several years of trying, we have not managed to activate it as we had hoped. Given the urgency of the collective action we need to transform the building industry into a force for good in the world, we all need to focus our... Read more

Hi all,

Looking from insights from anyone who's been through WELL certification before - we've got a lab/office project pursing WELL down in Florida that is struggling to meet the turbidity level requirements of the WELL W01 prerequisite, specifically with the hot water supply, and we're not sure how to best remediate the issue.  Should... Read more

The NYC SDL Group met to discuss the recent SDL Summit Report. The North Star tenant "About the well being of all species" spurred discussion of an example of building's impact on other species: bird collisions. Links to some resources to address this issue are below. Feel free to ask me and/or Stefan Knust about it. We would be more than happy... Read more

Welcome to the quiz portion of Eight Tips for Passing the LEED v4 AP BD+C Exam.

Learning Objectives
Upon completing this course, participants will be able to:


1. List important tables and calculations from the reference guide.
2. Explain what's pertinent about credit options and documentation.
3. Detail... Read more

Hi,

Has anyone used a sustainable product that complies with the EQc Low-Emitting Materials requirement that is a general construction adhesive similar to Liquid Nails? I've checked the Mindful Materials website and can't find anything. I found Red Devil General Prupose Construction Adhesive on UL Spot, but have never used it before. Any... Read more

Plug loads—the energy consumed by plugged-in devices—can use a substantial amount of the total energy in both residential and commercial buildings.

BuildingGreen-Approved Controls

BuildingGreen approves products that monitor and reduce electricity use for plugged-in electrical devices.

Plug Loads and Energy Conservation... Read more

This pre-summit workshop was pre-approved for 5 AIA LUs and 5 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure... Read more

I wanted to post a reminder for you all that the Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the... Read more

Section 901.5.1.3 of the 2018 IgCC includes a requirement that "A critical review shall be performed by an external expert independent of those performing the LCA."  I'm curious as to what other's experiences are with having an external expert review an LCA - how does one find such an expert?  Do you have any favorites that you'd recommend? ... Read more

You can download the guide here:
https://www.collaborativedesign.org/

And I would ask that any/all of you who find this interesting and useful to please share with your networks. We want it to get distributed far and wide!

- Clark

Hey all,

I got plugged into this group about two weeks before GreenBuild and wasn't able to make it to the summit. I'm still catching up on all the work this group has been doing recently, but I know one of the big ticket items is the SCL Contractor Commitment. 

I've read through the commitment that was posted right before... Read more

I really enjoyed last week's "Integrative Solutions Jam - Getting Better Materials Into Projects".  Thanks BuildingGreen for setting that up.  One of the great parts were the break out groups, where 4 of us could dig into various topics more deeply.

We got into a conversation about circularity and material re-use and Laura Soma with Gly... Read more

Hi everyone,

Just a reminder to please fill out the 2024 All-Networks Workshop Attendance Poll by the end of next Monday, December 18th. Thank you so much to those who have filled it out already! :) 

-Amanda