Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Hi, this is a somewhat niche/specific question - we are working on an all-electric school (middle and high school) that includes a chemistry lab. The lab was going to have portable sources for flame experiments, but there is concern that the portable sources would be unsafe for middle school students, so they are asking for a hard-pipe natural... Read more

Happy 2021 Green Gurus,

BuildingGreen has some New Years news to share with you all!

Announcing an addition to the Peer Networks family, we are excited to be launching the Sustainable Community Design Leaders (SCDL) Peer Network!

The SCLD peers are planners, architects, landscape architects, and other professionals at... Read more

Hi,

I have a colleague doing research on PCM in several projects. For context in their report, they were wondering if this group has seen any recent increase in application of PCMs in recent years. Is it just in ceilings or other applications? If so, what products are being used? They were having difficulty finding manufacturers other... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

Welcome to the quiz portion of Climate Analysis for Architects (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Access climate data.
2. Choose appropriate design energy simulation tools.
3. Know when and how to run analyses with projected weather data... Read more

This month on our Sustainable MEP Leaders call we were asked what resources would be suggested for advancing integrative design.

Two books immediately came to mind for me:

How Building Learn, by Stewart Brand

https://en.wikipedia.org/wiki/How_Buildings_Learn

It was many years ago but reading Stewart Brand’s How... Read more

Hi all!

A couple years ago now there was an incredible thread here about circadian lighting design and WELL. There was a lot of dipping toes in the water with intent to gather lessons learned and report back.

What have been the high points and low points of circadian lighting design so far? What seems cost-effective and worth... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Are your clients asking you about wellness? You’re not alone. Employee health and wellbeing has been called the ‘second wave of sustainability.’ In this hour-long live webinar, GreenStep Education’s Alex Spilger will walk you through Fitwel certification, including its requirements... Read more

Hi All

I'm wondering if any of you know how to track the GWP for materials that do not have an EPD?  I'm trying to do a carbon comparison on batteries but neither one has an EPD that I can find.  Thanks for any guidance you may have. 

Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

Hello all,

We are having a mini office debate on fiberglass vs aluminum windows for use in schools (k-12) in Massachusetts. In the past we have always used aluminum windows on our schools, for durability. However, their performance is not as great as other products that are up and coming on the market. There is some hesitation to switch... Read more

Hi All, wanted to share this webinar below :
The AIA 2030 Commitment and the Design Data Exchange (DDx) have transformed the way architecture firms collect project data on energy and carbon metrics, but it has never been a good place to visually understand these metrics. Architects tend to be visual people and have an intuitive... Read more

Jill is a licensed architect with WELL and Living Future accreditation. Through her experience leading sustainable achievement and verification on projects in the workplace, K-12, civic, and retail/mixed use typologies, Jill brings her passion for sustainable materials across vetting categories, AEC disciplines, bid scenarios, and market... Read more

The Project StaSIO competition is in full swing, and its time to rate the submissions that made it to the public voting round!  Fancy yourself a connoisseur of simulation graphics and have a spare 5-10 minutes this Friday?  Take a browse through the gallery and rate the 10 graphics and 4 case studies that made it to the final round! Winners... Read more

I wanted to make sure that you didn’t miss this fun event.  We can all use some fun right now.

Built Environment Plus is celebrating the arrival of spring with a fun competition to get people out and about safely. A digital Scavenger Hunt will allow teams of 4 (or larger families) to complete a series of photo, video, and text missions... Read more