BuildingGreen Report

Forum topic

Hello SDLs!

Here is the 2018 SDL Summer Summit Report, ENJOY!

In a couple of weeks we will share this report with the broader Green Gurus group. 

We are also working on setting up a webinar to present the 2018 SDL Summer Summit Report and discuss the Summit!

All the best,

RoseAnn

Forum topic

Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)

Forum topic

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

Forum topic

Hi all, 

Internally in our organization, we seem to have plenty of horizontal (infrastructure) resiliency expertise, but I'm finding the vertical resources to be lacking. I'm hoping to build a collection of beginner- to intermediate-level resources to help guide practice/design standards for our reference. Any pointers on good info... Read more

Forum topic

Good morning SDL,

I have a request for all of the supply chain labor folks out there… I would welcome hearing about your experience/stories/pointers you have based on your project work applying the DfF toolkit or other comparable supply chain labor efforts.

We have a socially minded client that is interested in Design for Freedom... Read more

Forum topic

Hello everyone,

I'm Jen, the administrative assistant for Peer Networks here at BuildingGreen. I haven’t been too involved with the SAL network yet, but I’m looking forward to getting to know you better!

There has been some interest in convening the Sustainable Advising Leaders to determine the shared purpose that will motivate us... Read more

Product Guide

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

Forum topic

Hi all and Happy New Year: I'm writing  to make sure that you're aware of the USGBC's call for members for a new LEED Resilience Working Group.  See below.  The deadline is coming right up -  Please pass this along to others you may think of in the topic areas they identify below.

Thanks

Mary Ann

I wanted to let you know... Read more

Quiz

Welcome to the quiz portion of Whole-Building Life Cycle Analysis: Promises and Pitfalls.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Define whole-building life-cycle assessment.
2. Explain what whole-building life-cycle assessment can and can't do so you can work within... Read more

Basic page

BuildingGreen Approved, like its predecessor, GreenSpec, is an independent product evaluation service for BuildingGreen members. We offer an unbiased look at products: BuildingGreen does not accept any manufacturer fees for our evaluations. Here’s a quick tour of the platform and how to use it.

Who can access BuildingGreen Approved... Read more

Forum topic

Hi everyone,

Just a reminder to please fill out the 2024 All-Networks Workshop Attendance Poll by the end of next Monday, December 18th. Thank you so much to those who have filled it out already! :) 

-Amanda

Forum topic

Good evening,

I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more

Campus-wide Group

Forum topic

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Forum topic

Hi All,

It's been a great week to get the message out about the importance of sustainability in our work, and this group brings such a rich and nuanced perspective to the table. I'm asking, if you published something for earth day this week for external consumption, could you share that here? I'm curious to see if there are common themes... Read more

Forum topic

We are looking at installing an aerobic biodigester in a commercial kitchen for an office client that is VERY concerned about zero waste.  Basically, this system takes food waste, treats it with micro-organisms to remove organic matter, and turns it into water of high enough quality to go straight to the sewer.  The manufacturer we are looking... Read more