I have been watching LEED Zero for a while, and have appreciated certain things, but one thing I think is an absolute disaster is their allowance of mainline RECs for claiming Zero Energy and Zero Carbon performance.  I just asked this question on the LEED Zero webinar, and the panelist basically said, "it's part of LEED Zero, therefore it is... Read more

MSA has issued a safety advisory because they have received field reports that their green colored MSA V-Gard Protective Caps are cracking. Please share this with your safety staff if they do not already know. Let's keep everyone safe!

This is the body field.

I'm looking to compare using an electric tower crane vs a diesel generated tower crane.  I've got the average gallons/hour for the size of crane I'm looking at, but when I reached out to the crane manufacturers, they can only tell me what size electric supply I need to provide, not the kWh usage for the cranes.  I know that it varies depending... Read more

Lake|Flato developed a project process road map as an internal project management tool over a decade ago, and we're looking into updating it.  It serves as a sort of "checklist" of major design, sustainability, and QA/QC milestones for each project phase.  I know we've talked about similar tools at other firms at past SDL summits, so wanted to... Read more

Welcome to the quiz portion of Ten Strategies for Growth in a Recession.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the importance of diversifying.
2. Restate the benefits to doing energy-modeling analysis very early in the design process.
3. Discuss how... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

Hello!

Here's a reminder that our call for this month will be taking place next Tuesday, January 14th at 2:00pm ET.

We hope you'll be able to join us on the call!

Join Zoom Meeting:

https://zoom.us/j/248664490

One tap mobile
+16699006833,,248664490# US (San Jose)
+19292056099,,248664490# US (New... Read more

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

I'm sure may are familiar with Aqua in Chicago, and Joe Lstiburek's article on thermal bridging. (https://buildingscience.com/documents/insights/bsi062-thermal-bridges-redux) We have similar problem with a project that is a residential highrise building, concrete structure. Here is my questions. Will energy simulation be able to pick up the... Read more

Hi all - at the suggestion of Nadav and some of the Sustainable MEP Leaders, I'm reposting a thread I started a couple days ago in the SMEP forum.

In response to increasingly aggressive (and effective) targeting of building owners (particularly schools), a group of researchers have put their support behind a letter warning against the... Read more

Hi All ... I'm seeking suggestions for an ecologically minded landscape/site/civil consultant. Ideally with strong knowledge about Florida ecosystems. Thanks much for any sharing.

Rand Ekman

rekman@hksinc.com

Hello Green Gurus!

Quick introduction as this is my first time posting - Louis Koehl, AIA, CPHD, Director of Sustainable Design at Handel Architects, based in NY. I recently joined the SDL Forum and met some of you at the regional summit and Greenbuild.  I'm excited to continue to connect with such an influential group! 

My... Read more

We considering PV glazing for a project in SW Louisiana. Anyone have any successful PV glazing projects? Is this ready for primetime? 

If you are interested in sharing this WELL AP Exam Study Guide within your organization and... Read more

When BuildingGreen started publication in 1992, simply finding building products designed with environmental benefits in mind was a big challenge. 

In the years since we’ve seen rapid advances in green building materials and products, and manufacturers are beginning to take topics such as embodied carbon and social justice concerns—... Read more

I'm pleased to announce that the AIA Board of Directors has unanimously adopted the A&D Materials Pledge as the AIA Materials Pledge!!!!! The support of so many of you was a key factor in making it so easy for the AIA Board to adopt The Pledge. The Materials Pledge now has 90 signatory firms, including many of yours. Thank you all.  Now,... Read more