BuildingGreen Report

Forum topic

Hi all,

We know preparations for Greenbuild are well underway for many of you. We also know that there will be many things competing for your time while you're there. Here's one more to consider! We don't have all the details solidified yet, but wanted you to know sooner rather than later for planning purposes.

We hope you’ll... Read more

Forum topic

We are looking to refine our general office specifications to weed out harmful materials and to prioritize sustainability for all of our clients. Have you had good experience with outsourced specification writers who are helping to push sustainability forward? Who do you recommend? Bonus points if they are familiar with Massachusetts codes and... Read more

Forum topic

Hi folks,

It was fun going back over all the great conversations we had and pulling them together in this report. Please feel free to share it with anyone--no constraints on that!

Also, we'll have a webinar next Friday based on this report-- March 8 at 2pm eastern:

I'll show the report and share key takeaways from the 12th... Read more

Forum topic

Hello everyone,

I'm Jen, the administrative assistant for Peer Networks here at BuildingGreen. I haven’t been too involved with the SAL network yet, but I’m looking forward to getting to know you better!

There has been some interest in convening the Sustainable Advising Leaders to determine the shared purpose that will motivate us... Read more

Quiz

Auto-quiz used for CEUs for attendees of the 2023 SCL Fall Summit.

Forum topic

We have all these resources out here in the ether but it’s so hard to pull them into one spot! I was asked, last minute to join a client call today to help convince both the client (affordable housing developer) and the mechanical engineers to "stick with" a commitment to 100% electric design that was publicly stated when the competition was... Read more

Forum topic

Hello -

We're hiring two interns this summer. One position is in Urban Design & Planning, the other is an architectural position split roughly equally between our Housing Studio and our Sustainability Resources Group. If you know of potential candidates who might be interested, please forward this link. http://www.seradesign.com/... Read more

Forum topic

Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

Forum topic

Hi all,

I'm curious if anyone has insight as to the "New Federal Building Performance Standards" that were announced in May of 2021 and then referenced again when E.O. 14057 came out. The memorandum for heads of agencies that was sent out with E.O. 14057 said that the CEQ would issue these standards, but I can't find a commitment to when... Read more

Quiz

Welcome to the quiz portion of How To Run a Great Workshop: 37 Tips and Ideas.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how the right mindset contributes to a successful design workshop.
2. Schedule a design workshop, set its agenda, and balance the skills of its... Read more

Forum topic

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

Basic page

BuildingGreen Team Memberships Give your team access to the ultimate green resource for designers.

Is your team ready to increase its sustainability knowledge? A team membership allows colleagues to work and learn collaboratively. We offer 10-person, 20-person, and 30-person team memberships. Make BuildingGreen your team's all-in-one... Read more

Forum topic

I'm looking for precedents of retail centers (think outdoor centers with multiple buildings or converted indoor malls) that have incorporated any of these strategies. Also, any research studies on the health, social, and other benefits of incorporating these strategies. 

a. Preserve/restore natural ecology, green infrastructure... Read more

Forum topic

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

Forum topic

How interested are you in a Sustainable MEP Leaders Summit this summer? 

Please respond to this poll ASAP, as we need to gauge interest before we finalize any details.

When: Wed. July 26 at noon to Thurs. July 27 at 1:30. 
Where: At a conference facility near Boston
Cost: $1200, which includes lodging, meals, and... Read more

Product Guide

Depending on seating type­­, these products can contain PVC, toxic flame retardants, hazardous adhesives and finishes, and other unsustainable materials.

BuildingGreen-Approved Seating

BuildingGreen’s seating meets ONE of the following sets of criteria:

is certified to BIFMA’s level 3 standard and, where applicable, contains... Read more

Forum topic

Hello! Does anyone know of any general contractors who produce a CSR? Is anyone aware of any general contractors who have an ESG rating? If so, what company is being utilized (i.e. EcoVadis) to get the ESG rating?  

Forum topic

Good evening,

I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more

Forum topic

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more