At first glance,

An Environmental Handbook for Florida Contractors looks like it deals only with the environmental regulations that Florida contractors must contend with. And, indeed, the Handbook describes in detail the requirements for complying with regulations at the federal, state, and local levels. But the book goes much further,... Read more

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Beginning this year, Miller Hull will not only continue to quantify the upfront embodied carbon of every project we finish through construction, but now purchase third-party certified carbon offsets equivalent to one-third of the project’s impact. Great design is no longer enough - we must take responsibility for our architectural impact in the... Read more

Has anyone submited this credit in lieu of demand response before?  I'm attempting on multiple projects but not sure what to expect review wise or how much confidence to have in the ability to get more than 1 point for trying.

https://www.usgbc.org/credits/gridoptimal-152-v4?return=/credits/New%20C...

Welcome to the quiz portion of LEED 2009: The Missing Manual.

Learning Objectives
Upon completing this course, participants will be able to:


1. Stay abreast of changes to LEED NC-2009.
2. Understand the more ambiguous aspects of LEED NC-2009.
3. Explain key interpretations of LEED NC-2009.
4.... Read more

Hi Sustainable MEP Leaders!

As we discussed at the Summit, we are going to have monthly calls to check in and advance our various initiatives. Let's go with the 2nd Tuesday of the Month.

Please join if you can--we have a lot to follow up on! (See the report I posted earlier this week for details.)

Thanks, and have a great... Read more

If you are interested in sharing this Guide within your organization and adding a copy to your library, please purchase the site-license guide.

The world’s most powerful customers are looking to rein in the excesses of their suppliers. Climate change is the likely catalyst for a recent uptick in calls for corporate transparency... Read more

BuildingGreen recommends low-emitting acoustic ceilings that do not contain formaldehyde resins or PVC coatings. Look for those that have C2C Silver or Gold certifications, are Declare Red List Free, and are third-party certified for low emissions using CDPH Standard Method. We also prefer wood ceiling products with FSC certification. The... Read more

Hello Green Gurus,

Here is the information for August's Peer Networks Webinar, A more Mindful Future: mindful MATERIALs plans for Digital Transformation through the Common Materials Framework. We hope you will join us!

Register HERE

A more Mindful Future: mindful MATERIALs plans for Digital Transformation through the Common... Read more

The current Stantec/BuildingGreen featured topic is Material Health. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Resilient Design featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Hi folks,

We're kicking off a new way for us to collaborate as a network: monthly web-based conference calls. The first one will be on Friday, Nov 15 at 1:00 eastern time. The topic will be "Sustainability and the Small Firm: Practices in Transition" -- which is the name of the proposal James has submitted (and gotten first-round... Read more

Hi folks,

It came up on the Regional Leaders call this week that many people aren't aware that we added a link to the BuildingGreen Communities in footer of BuildingGreen.com. So if you want an easy way to get to the forum page, other than clicking on a link in an email, there it is! (Thank you, Stephen Endy!)

The footer has a... Read more