Exterior shade or screening devices are generally much more effective at reducing solar heat gain than their interior counterparts.

BuildingGreen-Approved Shading

BuildingGreen approves exterior window and glazing attachments that reduce solar heat gain and glare or redirect daylight, providing important energy benefits while... Read more

Hi all --

We have a national restaurant client who is looking to source furniture (indoor and outdoor) with a minimum of 40% recycled/salvaged content from a woman- and/or minority-owned company.  They have a strong preference for a company that partners with/participates in community outreach and/or mentoring programs.  They also have ... Read more

Hi All, 

My understanding is that SCL reporting is only for refrigerant use, or recharging for headquarters. I've asked our MEP contractor for a list of our 21 units, refrigerant use, and what quantity of refrigerants were used to charge equipment during installation or service.  

Is anyone tracking this for job sites?... Read more

Hello, folks! We recently had contact with Northeastern University about sand. I know it sounds ... dry. But sand shortages are a serious issue globally and are leading to criminal activity everywhere and even "sand mafias" in poorer nations without resources to enforce mining laws.

The ask from Northeastern is that BuildingGreen amplify... Read more

Are you ready to share the story about your best projects?

AIA COTE Top Ten Awards is a great way to get recognition for your best work and the call for submissions for the 2024 cycle is now open!

The awards cycle has shifted, and the deadline for the 2024 awards is October 26.

So NOW is the time to pull together... Read more

Hi all - Reflecting on the COTE Top Ten Awards and Lloyd Alter's recent article  https://www.treehugger.com/green-architecture/keep-aiacotes-its-time-scrap-aia-awards.html, I am curious how many local/state AIA awards programs have incorporated sustainability reporting metrics as a requirement for all awards submissions, not just for categories... Read more

Hello Sustainable Construction Leaders, 

Mark your calendars! The next quarterly SCL call will be Wednesday, July 28th, 3pm ET (noon PT) and will focus on ESG.

Check in with three contractors at varying levels of development in their ESG programs. Julia Gisewite from Turner Construction, Jennifer Taranto from STO Building Group,... Read more

Welcome to the quiz portion of The PVC Debate: A Fresh Look

Learning Objectives
Upon completing this course, participants will be able to:


1. Catalog the history of PVC in the building industry.
2. Recount the connections between PVC and chlorine, dioxins, mercury, and vinyl chloride.
3. Explain the... Read more

Hello,

We are in the very early planning phase of a k-8 public school project to be designed and built in an economically challenged urban location with very limited site options. The project is not LEEDv4 registered yet.  We are at feasibility and costing the soil remediation, needless to say that we would really hope there would be... Read more

How much will it cost to achieve LEED v4 certification?

“We’d love a green building, but can we afford it?”

“We’re required to be LEED Silver, but we’re not sure how to get there under the new rating system.”

“Sure, we’re interested in LEED, as long as it doesn’t cost extra.”

LEED v4 and cost uncertainty

With... Read more

Greg Calnago

This would be a great place to share insights and reflections from the opening session. 

Hi all,

We recently learned that Mass Dept of Environmental Protection (MassDEP) along with a few other state agencies are looking to offer grants for wastewater heat recovery implemented into projects. This is a newer technology that puts a heat exchanger or heat pump in the wastewater system that then extracts the heat energy and... Read more

Are your clients asking you about wellness? You’re not alone. Healthy interiors and wellbeing are the trending buzzwords of sustainable design. Lighting design for circadian rhythm and water filtration methods might be on the... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Here are the links I mentioned at today's meeting:

Timeline:
https://docs.google.com/presentation/d/1RlN4t23uvBtxEzp4QuyqL-w5bqmE4P90...

BG Contacts and Responsibilities:
https://docs.google.com/document/d/1MWYuAEitjk7Zpc8KUNf1LwG3-5wK6sIlgwro...

BITuser Contacts and Responsibilities:
https://docs.google.... Read more

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more