The recent ruling to allow logging on several thousand acres of old-growth forest in western Oregon was portrayed in the national media as a blow to environmentalists, but the action may not prove so damaging in the end. While the ruling permits logging on 13 of the 44 sites that were under consideration by the so-... Read more

The City of Austin’s Green Builder Program was one of 12 award recipients in the United National Local Government Honours Programme at the Earth Summit in Rio, and the only winner from the United States. “The purpose of the Honours Programme is to recognize innovative local approaches to... Read more

Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more

To the best of our knowledge, this product is now being marketed under the name Rauhsaser by Better Wall System of Kenora, ON.

EBN Advisory Board member Mike Nicklas led an international delegation of renewable energy experts in promoting sustainable energy at the Earth Summit last month. He and others were negotiating for inclusion of renewable energy and energy conservation measures into agreements being worked out for the United Nations... Read more

At first glance,

An Environmental Handbook for Florida Contractors looks like it deals only with the environmental regulations that Florida contractors must contend with. And, indeed, the Handbook describes in detail the requirements for complying with regulations at the federal, state, and local levels. But the book goes much further,... Read more

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Hi - some of you may have received an invite to the White House for a 3-hr session to continue the discussion on the Net Zero Emissions building that they released earlier this year. This discussion will be on embodied carbon. I have no idea who the invite went to. If I beg I may be able to go, but if there are plenty of other Architects that... Read more

Hi All,

The SMEPL's Embodied Carbon committee has been hard at work developing a letter that calls for MEP equipment vendors to increase material transparency in their products.  As a way of contacting the most widely-used vendors first, we're asking each of you to enter your "Top 3" specified vendors for each of the products listed in... Read more

Hello Everyone!

Please mark your calendars and stay tuned for more information regarding an All Peer Networks 2020 Summit Season Closing August 10th, 3-5pm ET (Noon-2pm PT).

Register HERE to get it on your calendar! The staff at BuildingGreen are looking forward to planning a fun and engaging cross-network event focused on this... Read more

SDL folks,

I wanted to make sure that you all saw that the call for presentations is open for AIA Houston’s Gulf Coast Green conference.  GCG is the leading sustainable design conference in the region and has historically had some great participation from this group.  The theme this year is Sustainability + Technology.  Details here:... Read more

Hi All,

After this long winter, who is up for some fierce creativity and friendly competition in your own offices or between your companies?  What do you think of a location agnostic, virtual, Sustainability Scavenger Hunt from Earth Day to Mother's (earth) Day?

We've done the hard work for you. Join in on the fun and save your... Read more

Greetings from the CARE Tool Team,

We are thrilled to update you on the successful soft launch of the CARE Tool last week at Greenbuild! The online beta was unveiled at a reception hosted by EHDD, AIA COTE, and Architecture 2030 to 300+ people, where attendees got the chance to learn about and explore the tool in a demo room. We... Read more

If you use the mindfulMATERIALS library to easily access material transparency documentation (if not, check it out!), please take 5-10 mins of your time to fill out this quick survey and help guide the future of the library.

The mindfulMATRIALS Collaborative is an industry-led initiative, visit www.mindfulmaterials.com to learn more. ... Read more