Product Review
The company's promotional material is the epitome of environmentally friendly packaging—like a Ben & Jerry's annual report. The article reprints sent were even bound in a jacket made from corrugated cardboard. So we were quite intrigued by the product. Syndecrete™ is a lightweight, pre-cast,... Read more
Op-Ed
Introducing the first issue of our newsletter.
Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more
News Brief
The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more
Feature
Carefully stake the building site and driveway, remove trees that are within the excavation area or too close, then erect a fence to keep heavy equipment off fragile soils and away from nearby trees.
Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:
•Enhancing comfort by shielding the house... Read more
Feature
Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more
Feature
Susan Maxman is the first AIA president to make sustainable design a priority.
Q.Where would you say architects as a group stand on environmental issues?
A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more
Product Guide
Sheathing should be designed for durability, but some sheathing materials can be toxic or may contribute to moisture issues inside the building envelope.
BuildingGreen-Approved Sheathing
Sheathing approved by BuildingGreen contains recycled content, rapidly renewable materials, or otherwise provides exceptional performance, such... Read more
Forum topic
Hi All: We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.
A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more
Forum topic
Hi,
There is a Blog section on the BIT User site. Will you have a blog post in time for launch? Or should we hide that section to begin with?
https://live-bituser.pantheonsite.io/blog
Andrea
Quiz
Welcome to the quiz portion of Take Control of Your Materials: Four Empowering Lessons from Teams That Beat the Red List.
Learning Objectives
Upon completing this course, participants will be able to:
1. Customize a framework to prioritize goals and simplify complex material decisions.
2. Use a red-list... Read more
Forum topic
Hello Green Gurus,
Here is the information for this month's Peer Networks Webinar, Making the Case for Equity with Data: a Free Tool for Project Teams. We hope you will join us!
Register HERE.
Making the Case for Equity with Data: a Free Tool for Project Teams
Tuesday, July 27th, 2021
1pm - 2pm ET (10am - 11am... Read more
Forum topic
All -
We have corporate clients that are starting to request antimicrobials in response to Covid-19. I assume we are not the only ones seeing an increase in these requests. Knowing that the evidence supporting antimicrobials has limited to no efficacy, how are you approaching these conversations? We want to continue to advise based on... Read more
Forum topic
I'm wondering if people are seeing any increase in WELL or Fitwel certification interest? Or any other 3rd party systems aimed at health and wellness? WELL seems like a higher bar and now WELL v2 offers more flexibility. Is interest and adoption of 3rd party health and wellness certs growing?
Forum topic
Hi everyone,
Just a reminder to please fill out the SDL 2024 Events Attendance Poll by the end of next Monday, December 18th. Thank you so much to those who have filled it out already! :)
-Amanda
Forum topic
Hi All,
Not sure if this is the right location for this (as I'm a new member) but we're Planning the upcoming Water Conservation Showcase in Northern CA. Some details below
The Water Conservation Showcase brings together water, energy, and green building professionals to amplify and discuss innovative water management solutions... Read more
Forum topic
In an effort to share expert knowledge on the topic of whole building LCA, we are continuing our expert guest webinar series, addressing the topic of steel on March 19th at 1PM EDT. Michael Gryniuk PE, with LeMessurier and SE 2050, will be joining us to share his strategies for reducing the embodied carbon of steel. This webinar is particularly... Read more
Forum topic
Hello Sustainability Leaders,
Our next First Friday Fika* is tomorrow -- Friday, September 1st at 11am ET (8am PT). We'll meet on Zoom for some lightly structured coffee-chat time. This includes both facilitated sharing and open conversation about the topics you're interested in at the moment. Any Peer Network member who wants to say hi... Read more
Forum topic
Hi Everyone!
I'm Lauren Shumaker and I'm a Project Manager/Sustainability Manager with Turner Construction. As a long standing advocate for healthy and sustainable building materials, I look forward to expanding my ability to promote material transparency and shine a greater light on our ability to positively impact human and... Read more

