The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

I am putting together a presentation for our local AIA conference specifically about shading devices / dynamic glazing / dynamic shading and wonder whether any of you have experience / feedback from projects that used a dynamic system - exterior operable shading or dynamic glazing (like View, Sage).  Any post-construction / post occupancy... Read more

This is the body field.

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Thermal comfort is a science of both physics and people, always a tough... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Excess heat generated by air conditioners, refrigerators, boilers, and water flowing through pipes typically goes unused.

BuildingGreen-Approved Water Heat Exchangers

BuildingGreen lists desuperheating technologies and... Read more

Hi all,

I am working on a Div 01 sustainability spec section for our firm to include by default on all projects. I've been finding a lot of great sample language out there for embodied carbon measures and material transparency (huge thanks to anyone here who had a part in developing those resources). 

One thing I'd like to include... Read more

Hi, all - 

Thanks to many folks who connected on the heels of our last matchmaking post. Reaching out on behalf of a former SDL member, Lindsey Perez, to relay an opportunity from MIRACORP linked below: 

https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=97753&clientkey=957B67314D085A633E5C9C5568F3BC04 

Hello Sustainable MEP Leaders!

Over the weekend BuildingGreen received an inquiry about connecting with this peer network regarding a project. Please review David Cohan's email below to see if it is something of interest for this group.

We would invite you to reach out directly to David Cohan and let us here at BuildingGreen know... Read more

We have a client who just hired their first director of sustainability. That person is looking to connect with other people in similar roles within Healthcare / Hospital organizations. Does anyone have organizations they have worked with who have someone in this role (I know it is less common than other markets) or have a healthcare specific... Read more

We're looking to add a green wall to our existing offices in NYC. Can anyone please share any good product/vendor recommendations?

We were hoping to use Naava walls, but they seem to have retracted into Europe, as far as I can tell.

Hi GGs,

We are looking to do a renovation of a very leaky old office space, and we want to get a good snapshot of air quality and effective envelope R values both before and after.

Does anyone have experience with:

1. installing heat flux sensors on windows and walls

2. deploying IAQ measurement devices that can log... Read more

Has anyone here had success in comparing life cycle impacts for different window system options? We have been trying to compare different options but have only been able to source one expired EPD for an actual window (frame + glazing). Is the typical approach to separately compare glass and framing options? Are we missing something or is there... Read more

This are opportunities for us to get involved as design and construction allies with the new administration and the US Department of Energy on more efficient building.

The first link below is for low-carbon projects that will provide the case studies and solutions that the industry can follow.  The second is identifying barriers and... Read more

Hi SDL: sorry to send another missive so soon but I wanted all to be aware of a great new effort just announced today coming from Greg Kats and Vivian Loftness among others - The Smart Surfaces Coalition. This effort brings together resources and research around city-scale resilience. "The Coalition is committed to the rapid, cost-effective... Read more

Hello, what acceptable levels of air quality are you using to evaluate natural ventilation strategies for your projects?  In our Living Building we only open windows when PM10, PM2.5, etc. are within LBC and WELL limits.  In a seasonally smoggy urban environment, this limits how often we can utilize natural ventilation even if the outside... Read more

Hi! I'm writing a short news piece on WELL v2 and looking for someone very familiar with the existing and v2 standards to interview about the changes. If you meet that description and would like to go on the record with your thoughts, please reply to me directly at [email protected]. Thanks!