Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

In looking for ways to reduce jobsite waste and lower our carbon emissions, I'm working on a business plan for centralized procurement, in lieu of individual project purchasing their own tools, PPE, & consumables.  I'm curious as to how many other GC's on here use (or have used) a central purchasing process and if you have any pros/cons... Read more

Hello everyone!

The Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the workshop and might be... Read more

Thank you for subscribing!

You’re about to start getting free updates on key news and intelligence you need to succeed and do your best work in the green building industry. We’ll also share special opportunities to get our premium content.

Continue to BuildingGreen »

Continue to LEEDuser »

So our last webinar effort flamed out with the overloaded internet, but we've regrouped and have the session scheduled for this Thursday 4/2 at 1:10.  We pre-recorded the webinar to make sure everything goes smoothly and I have to say that Mike is delivering some pretty fantastic content. It doesn't engage LCA tools, rather focusing on core... Read more

Hi amazing people!

Most of our projects are now going with some form of gender neutral/all-gender/inclusive toilet rooms or those that can easily be converted to such. With no urinals, we lose 3 LEED points because urinals are very water-efficient. With urinals, it's not as pure a solution. Do you all just take a hit on the LEED points,... Read more

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

This pre-summit workshop was pre-approved for 6 AIA LUs and 6 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure... Read more

Hi all - I can't remember this topic being posted recently so here goes. With fossil fuel free finally being something our clients are increasingly wanting to know about, we are stuck on diesel generators. They have several advantages including: cost, inherent refillability from a truck, reliability, and are the market standard. In initial... Read more

HGA is looking to fill several positions, including: a senior leader for resilience services and research, senior and junior simulation experts, senior and junior sustainability leaders. Please pass this along to anyone interested in working in a collaborative, passionate, and seriously fun team setting. Locations all over the country too.... Read more

Welcome to the quiz portion of Doing Daylighting Right.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain occupants' needs and habits when it comes to daylighting.
2. Recognize at least three recent mistakes in daylighting design and their respective alternatives going... Read more

Hi all - I've heard from a few of you that you are interested in doing a book club or other internal education based on the Path to Zero Carbon. If you would like the word docs or pdfs of each of the 16 posts, let me konw and I'll send them to you.

I'd also like to know of those who are using it how it's going and what you're finding... Read more

Shane, please confirm that there is a meeting this Friday (4/6) and if the time is 3:00 ET. We plan to have at least one member from our team there. Also, please forward the links/numbers for joining the meeting.

It would be helpful to know any questions you have ahead of time (if possible) so we can bring answers and what portion of... Read more

Wall and corner guards increase durability, but these products are typically made of PVC.

BuildingGreen-Approved Guards

BuildingGreen approves products that avoid the use of PVC and are made with recycled content, FSC-certified wood, other biobased materials, or less-problematic plastics. 

Health and Environmental... Read more

Hi all,

I just joined the SDL group and am grateful to have the opportunity to be a part of this awesome community! 

I have an exciting residential embodied carbon research opportunity to share…

Lake|Flato Architects is collaborating as an industry partner with the RE2 Lab and the Hamer Center for Community Design at Penn... Read more