Hello everyone!

The Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the workshop and might be... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Trista Little, Erika Duran, and Paula Melton

So our last webinar effort flamed out with the overloaded internet, but we've regrouped and have the session scheduled for this Thursday 4/2 at 1:10.  We pre-recorded the webinar to make sure everything goes smoothly and I have to say that Mike is delivering some pretty fantastic content. It doesn't engage LCA tools, rather focusing on core... Read more

Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

Greetings Sustainable Construction Leaders,

As we begin closing out 2021, we wanted to give you a quick update that the next SCL Salary Survey will be coming to you in early January! The BuildingGreen team and SCL Steering Group have been busy this past month polishing up the questions for this anonymous survey.

A reminder of the... Read more

Hello all,

The Bay Area SCL contingent has recently published an anti-idling toolkit so contractors can get empowered to enact their own anti-idling policy on their jobsites. We're all in this together - if you haven't already brought this up with your company management, hopefully this toolkit serves as a good starting point. 

... Read more

With the current push for improved window performance to meet energy codes and Passive House, room side low-e coatings can significantly improve window U-values. However, back in 2018 Payette did this excellent study that showed that while room side low-e coatings improved window U-value and increased the interior radiant temperature, the... Read more

Hello SCL, 

For those who missed our last call, I am posting the results from the 2023 Contractor's Commitment reporting cycle. Reporting at some of the higher tiers requires sharing case studies or information with SCL or the public. All the information that can be shared publicly (or that I received express permission to share) is now... Read more

Hello,

We are having a discussion / a bit of a debate in our office about the merits and sustainability of different roofing materials. Our current standard is to use a PVC membrane, which we all know is highly toxic. TPO is an obvious alternative that is less toxic, but it has some performance concerns and can often lead to leaking (not... Read more

The Project StaSIO competition is in full swing, and its time to rate the submissions that made it to the public voting round!  Fancy yourself a connoisseur of simulation graphics and have a spare 5-10 minutes this Friday?  Take a browse through the gallery and rate the 10 graphics and 4 case studies that made it to the final round! Winners... Read more

Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana

P.J. is an accomplished writer and speaker who brings passion, humor, and discernment to all her work.

Whether it’s a spotlight report on decarbonization, a webinar on ESG, or just a chummy email bulletin, she is ferociously committed to truth, accuracy, and thoroughly... Read more

Hello, I'm wondering if anyone out in the network has experience with the following:

>Low carbon concete mixes for polished concrete slabs: we're hearing concerns from our concrete supplier that using a low carbon mix design for a polished concrete slab will cause pitting. What experience do others have?

>Low carbon concrete... Read more

Successfully managing the LEED documentation process requires specific knowledge, tools and skills that are not covered in the LEED Reference Manual. This condensed, online training is based on the LEED Project Management course that GreenStep developed and teaches through the University of California–Berkeley. As part of this interactive... Read more

Hi All - 

Has anyone explored hydronic system analysis software (1D CFD)? 

Some options are PipeFlo, AFT Fathom, PipeFlow (eerily similar name to first option), COMSOL Pipe Flow Module. 

Applications could range from general system troubleshooting, pump sizing, to district hydronic system network analysis. 

Best,... Read more

Welcome to the quiz portion of How to Succeed with the Living Building Challenge: 12 Teams Share Tips.

Learning Objectives
Upon completing this course, participants will be able to:


1. Prepare for LBC imperatives.
2. Structure an LBC process around absolute goals, with proactive leadership and follow-through... Read more