If only a few of the Best Practices will have checklists, which will be included under the "Implementation Toolkit" tab, I'm thinking we can simplify them (compared with LEEDuser).

I've attached a screenshot of a LEEDuser checklist. But I don't think BITuser will need the four types of icons, and the legend will take up more space than... Read more

A brief non-technical rant about OneClick LCA - from someone who is not actually USING the tool, but lobbying for its access.  Wondering if you all have better intel, or if it is just me.

We are working on a number of projects for which te teams are using OneClick LCA - for some cases it has a better international data set than others. ... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Welcome to the quiz portion of Better Choices in Low-Slope Roofing.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain life-cycle impacts, health and environmental hazards, and durability of low-slope roofing options.
2. Classify situations for which reflective roofing... Read more

Hi everyone! Our sister company, Flatiron, is a heavy civil/infrastructure contractor based out of Broomfield, CO. Their sustainability team is on the hunt for a Circular Economy Manager. Our companies recently announced exciting public ESG and climate commitments, including several related to waste reduction, life cycle assessments, and more... Read more

Is your team ready to increase its sustainability knowledge? A team membership allows colleagues to work and learn collaboratively. We offer 10-person, 20-person, and 30-person team memberships. Make BuildingGreen your team's all-in-one... Read more

It is with the greatest pleasure that I announce to this esteemed group the recognition of our very own and much-loved leader Nadav Malin as an Honorary AIA member. AIA COTE had the honor to serve as Nadav's sponsor and we are pleased and delighted with this outcome (but not surprised of course.) For the record, "The AIA recognizes the notable... Read more

Hi Everyone, 

Has anyone had success in finding organizations or programs that will recycle the hard hats? We are looking into options for recycling our expired hard hats that can no longer be used. Ideally, we would want to use a company with facilities across the country but we are open to any suggestions or ideas you all may have.... Read more

Hello all,

This month's SCDL call was full of great discussion! We decided this month that we are feeling good about where we are for the Task Force Agreement on defining social sustainabiltiy in our work. The aim is to work with this agreement for a while and see if it holds up as a process framework. There was also interest to invite... Read more

All,

I recently met Sahil Tadwalkar who is a Stanford MS Candidate in Civil Engineering. He and his group are interviewing design and construction industry professionals to understand issues and challenges around specifying and using low carbon solutions on projects. Interesting stuff! I encourage you to contribute by setting up an... Read more

Rotary Uninterruptible Power Units

Power interruptions and brief changes in voltage can damage electrical equipment, compromise computer data, shut down manufacturing, and endanger hospital patients. In the case of power outages, generators usually take over, but about 98% of all interruptions last less than ten seconds, and there is a... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi Carbon Working Group,

It’s been a while since our last online meeting on 3/31 –- admittedly, a bit too long -- so I wanted to share some updates.  You might have seen Candice Pearson’s 5/13 post about the structure of the Contractor’s Commitment and how it’s evolving into a set of guidelines available not only to our SCL Group but to... Read more

Here's the Core Purpose for this group that came out of the Inaugural Summit.

We're off and running!

Pat U. Mellona