I am looking for example specifications for low carbon concrete to have our structural engineer(s) review and incorporate.  Does anyone have good examples or  link(s) to good examples?

Thanks,

Mark

Apologies if some of you are seeing this for the second time - on behalf of Frances Yang, Mike Gryniuk and the Carbon Leadership Forum, consider signing on in support of the SE 2050 Challenge for structural engineers. (Yes, there is an option to sign on as a non-structural engineer, in support of the program.)

http://... Read more

Welcome to the quiz portion of Choosing Windows: Looking Through the Options.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Choose a frame material based on its structural characteristics, thermal insulation, durability, maintenance requirements, cost, and effects on the... Read more

We considering PV glazing for a project in SW Louisiana. Anyone have any successful PV glazing projects? Is this ready for primetime? 

I'm sure may are familiar with Aqua in Chicago, and Joe Lstiburek's article on thermal bridging. (https://buildingscience.com/documents/insights/bsi062-thermal-bridges-redux) We have similar problem with a project that is a residential highrise building, concrete structure. Here is my questions. Will energy simulation be able to pick up the... Read more

ASHRAE posted this year's list of honors and right there at the top of the list is our SMEPL colleague, Cindy Cogil - now able to add FASHRAE to her signature block!  Well done, Cindy and congratulations to ASHRAE for recognizing your accomplishments.

Hello Green Gurus,

Here’s one more exclusive webinar for you! Coming up next week:

Behind the Scenes: COTE Top Ten 2021
Tuesday, May 4th, 2021
2pm - 3pm ET (11am - 12pm PT)

Register here.

Description:
Eight of this year’s Top Ten winners are from firms in this network. We also have a member on the... Read more

Hey there, Tally users.  I'm looking for some answers to a few basic questions about using Tally:

When do you typically run a WBLCA?  As soon as you have a Revit model?  Later, maybe end of DD, when the Revit model is more fully developed? At the end of CDs? Are you mostly using Tally for targeted studies or WBLCA for the purpose of... Read more

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

This summit was pre-approved for 3.5 AIA LUs and 3.5 GBCI CE hours.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

Is there a way for southface staff or guest experts to "pin" or "tag" the "right" answer in a forum question? It might be useful to designate the right answer and pin it to the top of a forum thread. I don't want the answer selected via crowd source but by staff or volunteers. Thanks.

Hello Green Gurus,

Here is the information for November's Peer Networks Webinar, Learning and Applying Evidence, Rosetta Stone: A Translational Tool for Research-Informed Practice. We hope you will join us!

Register HERE

Learning and Applying Evidence, Rosetta Stone: A Translational Tool for Research-Informed Practice... Read more

The Post-Yost Experience

What better way to follow up the magic of a live presentation from Peter Yost than with 15 free days of BuildingGreen Premium?

Get a free 15-day trial of BuildingGreen Premium »
No credit card required Peter Yost, relaxing after a long week's work.

Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel