Hi folks,

Any of you who have completed WBLCA for projects - we are working on a new initiative with the City of Cambridge (building on our prior work NZ Climate Action Plan) but this time focused exclusively on embodied carbon.

We have not yet begun the work - but they have an opportunity to make a move on this on Tuesday and... Read more

Now available on demand

As more and more architects, designers, contractors and owners demand transparency surrounding human health impacts in the built environment, manufacturers need short cuts and tools to meet the call of this demand.

This webinar is intended to educate manufacturers about the market demands for creating... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more

Hi All, 

The rural concrete supplier that is used for most of our projects sources their fly ash from a nearby coal burning plant that is scheduled to be closed in the next two years. In anticipation of this, they are looking into alternative fly ash sources and SCM options and we'd like to provide suggestions.

Does anyone have... Read more

Following up on the Decarbonizing Existing Building: Envelope + MEP Solutions Integrative Design Jam, a cohort of us determined a "Decision Making Tree Toolkit" that begins to classify decisions into and "if/then" framework using region, market, climate, scale of intervention, and other factors would be useful in helping us collectively move... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

The COTE Toolkit just launched on AIA.org's site, please go and check it out and share with your networks. The project spanned over the last year+ with over 40 authors, subject matter experts, and reviewers contributing to the process, (including many Green Gurus!)

With the goal of closing the information gap to designing high... Read more

I have reached out to the AIA staff members that I work with on the Energy Leadership Group (AIA ELG) to see about getting into the cycle of updating these standard documents.  Another member of the ELG, architect Kjell Anderson of LMN in Seattle, is interested in working with us on this effort, as he has started including Standard 209 language... Read more

Who all is implement 360-degree reviews as part of their employee review process?  Lake|Flato is thinking of implementing this and would like to talk to a few other firms who have experience they would be willing to share.  Please contact me if you'd be up for a short email discussion or phone call to discuss.  hholdridge@lakeflato.com

... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to... Read more

Welcome to the quiz portion of How To Run a Great Workshop: 37 Tips and Ideas.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how the right mindset contributes to a successful design workshop.
2. Schedule a design workshop, set its agenda, and balance the skills of its... Read more

Huge congratulations to everyone involved with a Top Ten winner this year! 

In a rare feat--Leddy Maytum Stacy got two!

Also P+W, Lake|Flato with Cooper Cary, WRNS, SOM, Olsen Kundig, KieranTimberlake, DLR--nice work! (And who is Studio27?)

Here's James Wilson's take on what's special about each winning project.

... Read more

On our Contractor Coffee talk a few weeks ago, Emi LaFountain (Turner Construction) brought up the idea that there was a lot of blue stain wood that are being landfilled instead of used, and suggested that maybe the designers among us could find a way to turn ugly into beautiful.

I had never heard of this issue, but I was on a call the... Read more

Hi everyone,

Just a reminder that the first-ever Sages monthly call is happening tomorrow, February 13th, at 12pm ET! We'll be introducing ourselves to each other and discussing our visions for the network. 

Here is the agenda for the meeting, and below is the Zoom info: 

Join Zoom Meeting
https://us02web.zoom.us/j/... Read more

Depending on seating type­­, these products can contain PVC, toxic flame retardants, hazardous adhesives and finishes, and other unsustainable materials.

BuildingGreen-Approved Seating

BuildingGreen’s seating meets ONE of the following sets of criteria:

Hi all,

We are designing a mass timber building and are closing in on selecting our mass timber supplier.  One supplier is offering FSC wood and the other is offering PEFC.  I don't know enough about PEFC to make a clear recommendation to the client about how it compares to FSC.  I understand that PEFC endorsed SFI, so that concerns me... Read more

Hi Fellow Design Professionals: It would be great if you could participate in this important research on the status of professionals addressing extreme heat.

Thanks.

MAL

Planning for Extreme Heat Survey

Our research team from the University of Arizona and Arizona State University is studying how planning... Read more

Does anyone have experience with Oknoplast PAVA windows that they would be willing to share?