Now available on demand

As more and more architects, designers, contractors and owners demand transparency surrounding human health impacts in the built environment, manufacturers need short cuts and tools to meet the call of this demand.

This webinar is intended to educate manufacturers about the market demands for creating... Read more

Green gurus!

We're getting some interest from clients abroad on two specific materials which we don't have experience with here in the U.S.:

1) Cross Laminated Timber (CLT)

and/or 

2) CarbonCure concrete

Anyone willing to share lessons learned on these material either here in the forum or offline? Or point me... Read more

RoseAnn’s role at BuildingGreen as Peer Networks Manager focuses on Peer Networks projects and planning events, including annual Peer Network Summits. 

Prior to BuildingGreen, RoseAnn worked in the nonprofit sector in customer-service based roles which allowed her to reconnect with her local community soon after earning her... Read more

Depending on seating type­­, these products can contain PVC, toxic flame retardants, hazardous adhesives and finishes, and other unsustainable materials.

BuildingGreen-Approved Seating

BuildingGreen’s seating meets ONE of the following sets of criteria:

Anyone know of tools/methodologies for estimating embodied carbon and carbon sequestration potential of individual green infrastructure projects (e.g. bioswale along bikeway)? I've seen tools for the larger scale (e.g. land use change) as well as specific to trees (e.g. i-Tree), but these don't fully meet my needs.

Thanks!

To piggyback off Nathan's introduction where he mentions construction waste management, who is doing anything innovative or different in managing construction waste?  Construction waste has not historically been a passion of mine, but now working in sustainability and construction, I feel like it has to be by default.  

We have a... Read more

I've been seeing Armstrong's DC flexzone ceiling system at Greenbuild for many years. I'm working on a net zero project with LED lights and solar panels. In theory, the transmission losses in going from DC power from panels to AC for the building to DC for the lights would be eliminated. But does anyone actually have experience using this... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

All,

I think there may be more than a few people interested in an article I co-authored titled Comparative whole building life cycle assessment of renovation and new construction. It is now available in the journal Building and Environment. Fortunately we have a link that gets you past the paywall that is good for 50 days. If you have... Read more

All,

My team at WSP has a pretty awesome senior position available and I wanted to bring it the group's attention as we try to get the word out. The role is to lead our Sustainable Design Analytics group (part of our Built Ecology team), ideally based in CA or NYC, but open to wherever good candidates may be. If anyone knows someone that... Read more

Hi all, are there requirements to include/submit backup documentation to the CC excel template? Or is it just the template itself that gets submitted? The question is coming up from our leadership over what documents are public vs internal.

Hi folks,

We had a rich conversation in our monthly meeting last week. I've summarized the highlights below. Next call is July 11 at 2pm eastern. If it isn't already in your calendar, here's the Zoom link.

What’s on people’s minds?

Looking into high-temp water-source heat pumps for industrial applications. Transom and... Read more

Greetings to all of the sustainability leaders in the Green Commons!

Note: This is a message about politics, which we generally try to avoid in our safe space--but in this case it’s directly tied to climate action so I feel good about sharing it. Feel free to let me know or check in with the BuildingGreen folks if you have concerns or... Read more

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

Hey Everyone! My firm is a part of the local Passive House group helping organize the local Humid Climate Conference on May 2nd - 3rd. I wanted to make a post in the chat for those interested to sign up.

The theme is "Barriers To Better Buildings" and it's going to be a really strong, humid climate focused conference. We've nearly got... Read more