Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

ON SALE NOW - for a limited time, get the Guide for $69.00

If you are interested in sharing this guide within your organization and adding a copy to your library, please purchase the guide's site license. The site license permits the purchaser to share the PDF Guide file within their company/organization and post it on their... Read more

I'm looking to compile an outdoor weather station for a local project, and we'd like to add local outdoor CO2 information to our data. I usually work with Onset HOBO products, but they don't offer an outdoor CO2 sensor. Their weather stations can take data from any CO2 sensor with an analog output - does anyone have any suggestions?

Ventilation fans, kitchen range hoods, and laboratory fume hoods can use significant amounts of energy from both the fan motor and from venting heated/cooled air out of the building—air that then has to be replaced and conditioned by energy-intensive HVAC systems.

BuildingGreen-Approved Ventilation Fans

BuildingGreen ventilation... Read more

Welcome to the quiz portion of Toxic Chemicals in Buildings: How to Find and Avoid the Worst Offenders (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how key health hazards and opportunities for healthier choices vary by product category.
2. List... Read more

Hello lovely Green Gurus. Hope you all are well. I am wondering if anyone has installed an indoor sports floor that performed well and is low-emitting. This is for a multi-purpose gymnasium at a community center. Any chance?  Thanks All!

Hello, Green Gurus!
It was lovely to see some familiar faces (and names) in this afternoon's webinar about Low Carbon Specs. A little personal info, but I have just recently returned from maternity leave, and plugging back in to this network of passionate sustainability professionals is one of the things that actually made me look forward... Read more

Hello all,

I need future weather files for a project. We are looking at three years, 2050, 2075, and 2095 using two climate change scenarios, low emissions, and high emissions. I have seen ARUP's Weathershift site that uses RCP 8.5 and RCP 4.5. Are we assuming that 2.6 is not achievable? I would have used this as a low emissions scenario... Read more

With depth of thought and a broad view of the horizon, Candace Pearson can take a nuanced vision and sharpen it into focus, propelling the team around her forward. Operating in all three of BuildingGreen’s service offerings—publications, consulting, and peer networks—she finds pragmatic ways to fundamentally shift how we create our built... Read more

Hi all,

Thanks again to those who presented at the AIA Show & Tell! Here are the slides for some of the fascinating presentations we saw. Please do not share the slides outside of the networks unless they are marked “PUBLIC.”

There may be more to come; if you presented but did not yet provide permission for your slides to be... Read more

A couple Minnesota cities are considering adding electrification to their sustainable building policy (required for new construction receiving City financial assistance). Concerned that the market isn't ready for a full-on mandate, they are considering a more moderate approach of requiring developers/design teams to conduct an electrification... Read more

Under a high carbon scenario, most of North America will be 2 degrees C hotter by 2050. Meantime, we're designing buildings that will still be around in 2050, to codes that don't yet factor in chronic risks associated with climate change. I want to explain these risks to my colleagues; I'm hoping some of our green gurus can help answer the... Read more

Hi All- I'm posting this question for my ZGF colleague Chris Chatto.  Somehow he wasn't initially included on the SDL list as it moved from Wiggio to BuildingGreen's (Green Gurus) site.  Happy New Year, Lona

Hi everyone –

We could use your help in developing a determining a “red list” premium for a feasibility cost... Read more

Is LEED Online mind-numbingly slow today for anyone else? Or is it just me? I may give up and try again tomorrow. Frustrating as I was hoping to submit a final review today. :(

Good morning all!

We're working on a higher ed project, and the university PM recently read an article about eco-friendly drywall and is interested in using it on the project.  We're currently using the USG EcoSmart drywall on another project and mentioned it as an option, but the article she forwarded also mentioned ExtremeGreen's MgO... Read more

Hi All, I was initially reluctant to share this, but I've seen similar posts and I think it's in line with our mission and interests so I'll go ahead with it.

Tomorrow 12/9 at 1 PM EST I'm moderating a panel of industry leaders in public health (as it pertains to buildings), construction finance, and project development to review the... Read more