Received answers from below questions from NIST Andy Persily

1. Is there a preferred bookends range of CO2 for both “optimal” energy and human performances?

Andy: No

2.Is the ASHRAE ventilation of 1000-1200 ppm average, probably not based on performance, suggesting current ventilation rate is sub-optimal with cognitive... Read more

Chillers are part of larger systems that provide cooling in large commercial buildings.

BuildingGreen-Approved Water Chillers

Because there isn't a single relevant efficiency standard for chillers, approved products use innovations such as magnetic bearings, variable frequency drives, or other technologies that significantly... Read more

Hello everyone! I’m happy to be re-joining the group after a two year hiatus.

Pre-pandemic I got to participate in a few winter summits when I was Sustainability Director at Overland Partners in San Antonio. I’ve recently joined Mahlum Architects in Portland and I’m excited to re-engage in the conversation, this time from the West Coast... Read more

Healthcare Design, one of the most respected and widely recognized trade journals in the health care AEC space has released the names of its 2022 HCD 10 winners.  The mission of The HCD 10 is to recognize and celebrate the broad spectrum of outstanding professionals in that industry and the influence they have on healthcare design.

One... Read more

Hello SCL,

We've heard you ask for more ways to connect with your SCL peers. So, we are happy to announce that we will now be holding bi-monthly calls where the entire SCL network is invited. These calls will be limted to SCL members (with the exception of guest speakers) so please don't share the information with colleagues. 

The... Read more

Has anyone done any museums in which they hired an independent QA/QC specialist? Or perhaps, your firm offers QA/QC services and experise in this area? If so, could you please reach out to me? I'm wondering what firm you used and what your experience was. Was it worth the fee?

Hello All,

Through a regional School of Architecture, our firm has been connected with a very intriguing startup that has been engineering a new rooftop wind energy technology. They are developing a system to economically capture the increased wind flows at the edges of commercial building rooftops. They have engineered this system,... Read more

I'm curious who in this group has used ASHRAE Standard 209-2018, Energy Simulation Aided Design for Buildings except Low Rise Residential Buildings?

We've used it internally (minimally) as a reference to help better communicate the goals and activities involved with energy modeling at various phases of design. But it seems like there's... Read more

At Living Future last week a woman from Google asked about cost comparisons and I shared that the City of Santa Monica conducted a study analyzing the costs of a prototypical mixed-use project for a Living Building vs. LEED v4 Platinum vs. code compliant (Title 24, part 6). I thought this group might be interested as well so here is the link... Read more

I am looking for anyone that specializes in this area, see the principles below.

http://universaldesign.ie/What-is-Universal-Design/

We have looked at HOK's Neurodiveristy document which is great. Are there other resources like this, or other designers/consultants you have worked with?

TIA

Kristen

Kristen... Read more

Dear SD Leaders: I'm writing to make sure that you've seen a letter that has been circulating protesting the ‘pro-asbestos’ rule change the EPA is considering.  The letter is soliciting firm signatures/owners (as opposed to individuals).  I encourage you to sign and/or get your firm to sign ASAP. 

Please forward as well to any firm from... Read more

Welcome to the quiz portion of Introduction to WELL Certification: On-Demand Webcast.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Identify the Seven Concepts within WELL.

2.  Describe the differences between WELL and other frameworks such as LEED & Fitwel.

3.  List... Read more

The Minnesota CLF chapter’s Specification Subgroup (myself, Andy Marolt/Ryan Companies, Laura Eder/ESG, Java Nyamjav/MSR Design, with input from Annie Perkins/SFI) recently collaborated on a draft set of specification templates incorporating embodied carbon requirements into product performance and action submittals. This work builds on sample... Read more

Welcome to the quiz portion of Retrocommissioning: Big Savings for Big Buildings.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define the term retrocommissioning.
2. Explain how whole-systems RCx differs from energy-focused RCx.
3. Describe several examples of how... Read more

Hi folks,

Registration is now open for the SDL Summer Summit. We expect this one to fill up, so if you plan on coming don't wait too long to register.

As usual, those of you who are coming will help set the agenda. We reviewed some ideas yesterday with the Steering Committee and agreed that some topics from January's Winter Summit... Read more

Hi folks,

There are a few Peer-Network related opportunities at the AIA Conference on Architecture, and it's coming up soon (June 4-8)! If you'll be in town, I hope you can join us! And if you're speaking at the Conference, let us know--whatever people in this network are talking about is likely to be super-interesting to the rest of us... Read more

AIA is looking for additional technical review jurors for their 2022 COTE Top Ten Award program particularly in the Water/Ecosystems and Energy/Discovery categories.  If you are interested please go to this webpage and complete the form.

Time is of the essence, so please complete the form no later than Friday, January 14, 2022.

Gather with the Changemakers in Sustainable Design

You are invited to join BuildingGreen and your peers for the Summit that has always delivered on driving our movement forward. Over three days of collaboration, workshops, learning, sharing, networking, and socializing, we’ll explore what Sustainability Leadership looks like in 2023 and... Read more