Carol Venolia, Publisher/Editor

Builders concerned about out-gassing of formaldehyde from medium-density fiberboard (MDF) have long used Medex in cabinets. This exterior-grade product, originally developed for highway signs, is considerably more expensive than conventional MDF or particleboard, however. Now Medite II fills the need for a... Read more

The City of Austin’s Green Builder Program was one of 12 award recipients in the United National Local Government Honours Programme at the Earth Summit in Rio, and the only winner from the United States. “The purpose of the Honours Programme is to recognize innovative local approaches to... Read more

To the best of our knowledge, this product is now being marketed under the name Rauhsaser by Better Wall System of Kenora, ON.

EBN Advisory Board member Mike Nicklas led an international delegation of renewable energy experts in promoting sustainable energy at the Earth Summit last month. He and others were negotiating for inclusion of renewable energy and energy conservation measures into agreements being worked out for the United Nations... Read more

At first glance,

An Environmental Handbook for Florida Contractors looks like it deals only with the environmental regulations that Florida contractors must contend with. And, indeed, the Handbook describes in detail the requirements for complying with regulations at the federal, state, and local levels. But the book goes much further,... Read more

Q.Where would you say architects as a group stand on environmental issues?

A.Architects tend to be reactive rather than proactive. It is important that we take the lead on these environmental issues. The architecture schools in particular tend to be conservative. They just aren’t... Read more

Protecting trees and the local ecosystem when building on previously unbuilt land is a vitally important—yet often overlooked—part of environmentally responsible construction. Healthy trees and shrubs can reduce a home’s environmental impact and directly benefit homeowners in a number of ways:

•Enhancing comfort by shielding the house... Read more

Buildings have a tremendous impact on the environment. In North America, buildings and the building industry account for about 30% of carbon dioxide emissions, 35-40% of ozone depletion, 20-30% of municipal solid waste, vast quantities of natural resource consumption, and dramatic loss of open space each... Read more

The American Institute of Architects convention in Boston this past June was the setting for a changing of the guard in the American architectural establishment. The Institute’s first woman president took the reins, the Committee on the Environment became its largest and fastest growing committee, and the first installments of the Environmental... Read more

Ozone depletion and global warming are two of our most serious environmental problems—and foam insulation materials containing CFCs (chlorofluorocarbons) contribute significantly to both of these problems. The environmentally concerned builder or designer should make it a highest priority to avoid them. Even many of the non-CFC alternatives... Read more

For questions and/or to be added to the Summer Summit waiting list, please email Jerelyn Wilson directly.

2019 Summer SDL Summit
Islandwood, Bainbridge Island, WA
July 31st- August 2nd, 2019

Hello SCL, 

I have a slightly different ask than my usual Contractor's Commitment announcements.

Our newest writer, Elizabeth Waters, and I are researching for a BG article about construction emissions and jobsite carbon for BuildingGreen.com

In particular, we are trying to research how much of a building’s lifetime carbon... Read more

I am looking for a healthy and safe mold preventative product to use on wood construction to prevent mold growth as this full wood building (truss, framing, exterior sheathing) will be exposed to moisture via the elements until the roof gets put on in earlywinter.

Please share your feedback, thus far we have found what looks like a lot... Read more

Hello everyone, Happy New Year! 

I wanted to send a quick note that we have an awesome group registered for the Sustainable Design Leaders Winter Summit 2020 and we still have a few open seats! This is taking place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL with an exciting Pre-Summit Workshop happening that Wednesday. If you... Read more

I am very interested to understand the deployment of LED temp jobsite lighting on a national level.  I think this all goes back to the low emitting jobsite.

1. Does your firm utilize temp jobsite lighting on your projects?  

2. Is this every project or a percentage of projects?

3. In your state or area is it prevalent, one... Read more

Can anyone point me to a (dream?) resource listing effective R-values of various wall assemblies?  We are trying to find a cost-effective R-40 wall assembly for a one and two story public middle school targeting net zero energy in Oregon.  Referencing Seonhee's "thermal bridging" thread in late April, I used Therm's native drawing feature, but... Read more

Welcome to the quiz portion of The Sound of Sustainability: Acoustics in High-Performance Design!

Learning Objectives
Upon completing this course, participants will be able to:


Describe how increased acoustic performance benefits indoor environmental quality (IEQ).

Recount the negative impacts of poor acoustic... Read more

Greetings from the CARE Tool Team,

We are thrilled to update you on the successful soft launch of the CARE Tool last week at Greenbuild! The online beta was unveiled at a reception hosted by EHDD, AIA COTE, and Architecture 2030 to 300+ people, where attendees got the chance to learn about and explore the tool in a demo room. We... Read more