Forum topic
Hello Green Gurus,
Here is the information for this month's Peer Networks Webinar, Adapting the Construction Process for Passive House. We hope you will join us!
Register HERE.
Adapting the Construction Process for Passive House
Wednesday, April 28th, 2021
2pm - 3pm ET (11am - 12pm PT)
Description
... Read more
Forum topic
Hi GGs,
We are looking to do a renovation of a very leaky old office space, and we want to get a good snapshot of air quality and effective envelope R values both before and after.
Does anyone have experience with:
1. installing heat flux sensors on windows and walls
2. deploying IAQ measurement devices that can log... Read more
Forum topic
Has anyone pursued the schools Mold Prevention IEQc10 successfully and have format for the documentation created they would be comfortable sharing? Our contractor is excited about pursuing this credit but no on our team has pursued it before.
thanks in advance!
Product Guide
Conventional roofs contribute to heat loss, heat islands, and excessive stormwater runoff.
BuildingGreen-Approved Green Roofs
BuildingGreen approves systems with appropriate planting media that can be created from regional materials and may be blended for specific characteristics, such as:
nutrient retention structural... Read moreForum topic
Hello, what acceptable levels of air quality are you using to evaluate natural ventilation strategies for your projects? In our Living Building we only open windows when PM10, PM2.5, etc. are within LBC and WELL limits. In a seasonally smoggy urban environment, this limits how often we can utilize natural ventilation even if the outside... Read more
Forum topic
Hi Fellow SDLers: I'm sure you're like me and thrilled at the news of the Senate's passage of the historic climate bill yesterday. And also are likely on pins and needles until it's passed the House and signed into law. What a conclusion of a terrible roller-coaster ride that is our Congressional system.
I'm writing to pass along a... Read more
Basic page
Our all-volunteer Advisory Board helps BuildingGreen identify the most critical topics for our coverage, and directs our research as we investigate these topics and bring them to our readers. Their distinguished and varied service in the field of environmentally responsible building is an inspiration.
Steve Baczek, R.A., Reading, MA Bob... Read moreForum topic
I was recently asked about potentially specifying concrete with wood nanoparticles and concrete with biochar as a way to further lower the embodied carbon and to increase concrete strength. These approaches are something I know nothing about, and wondering if anyone in this group has any experience and/or observations that might be relevant to... Read more
Forum topic
Hey All!
One of the initiatives from our first meeting in Chicago was to gather and develop resources related to plug and process loads in buildings which will help us all with: energy modeling, equipment sizing and power distribution. We had our first call this morning and are rolling. Aspirations are that this could turn into a... Read more
Forum topic
Hey there, Tally users. I'm looking for some answers to a few basic questions about using Tally:
When do you typically run a WBLCA? As soon as you have a Revit model? Later, maybe end of DD, when the Revit model is more fully developed? At the end of CDs? Are you mostly using Tally for targeted studies or WBLCA for the purpose of... Read moreForum topic
is anyone aware of some guidance about citation protocols for when a person/team/org uses an AI tool to generate some base components for a report (which is then heavily edited by humans)?
I'm inclined to disclose in detail which tools were used and how ... but would love to know if there are some industry protocols shaping up about this... Read more
Quiz
Welcome to the quiz portion of Measuring Energy Use in Buildings: Do Our Metrics Really Add Up?.
Learning Objectives
Upon completing this course, participants will be able to:
1. Explain the differences between site energy, source energy, and energy cost.
2. Summarize three ways in which source energy can... Read more
Forum topic
Hi All,
I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more
Forum topic
Thanks to those of you who signed up to share your (other) talents!!!
If you are seeing this for the first time, check out the link below to see your peers performing and if you have a talent you'd like to share (music, movement, spoken word, comedy, cooking...whatever!) send me an email (bb@sustainable-performance.org) and we'll follow... Read more
Forum topic
Hi: I'm writing to share a unique opportunity to make a difference at SCALE as a Sustainability Manager at Amazon Global Services.
This comes from Lisa Matthiessen, FAIA, LEED Fellow who some of you may know. Lisa just joined Amazon's Worldwide Sustainability Team who is charged with making real their Net Zero for all operations by 2040... Read more