Sharing the below message from Mike McMeekin, who some of you know, regarding his current initiative, the Engineering Change Lab USA Climate Change Noble Purpose Statement. (Also, here is a Link to today's LinkedIn Updates on this topic.)

Greetings, I am re-sending my email from last week primarily as a reminder regarding the sign-up... Read more

I have a client that is very interested in automated shades for a mid-rise multi-family housing project. Do you have any examples of projects that have attempted this? I assume it would involve occupancy sensors and/or an over-rideable default setting dependant on sun position and temperature. I also have an MEP Engineer team that is having a... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Join your peers and BuildingGreen February 22–26, 2021 for an all you can eat buffet week of networking, problem solving, and connecting with sustainability leaders within your industry and across the Peer Networks! During this week we will create a space for you to offer and receive support, exchange ideas and resources, and become stronger,... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more

Hi all-

We are dabbling in developing an official research component of our firm. We have collaborated with a class at a local university and are looking for ways to take our research to a higher level. I'm curious how some of the other firms doing design or building technology research approach the process. For instance, do you have a... Read more

Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

Hello SCL,

Our diligent Contractor's Commitment working group (led by the great Amanda Atkinson) have reviewed a massive amount of feedback and will soon be releasing an updated version of the program (CC 2.0). We will need a majority of the SCL membership to vote YES to adopt the updated version for 2023. 

In advance of the vote... Read more

We are coordinating an effort to produce a "Building Reuse Practice Guide for Climate Action" for the AIA.  This is intended as a resource for architects working on major renovations and adaptive reuse, with a focus on reducing energy use, lower embodied carbon, electrification, and adapting to a changing climate. We are looking for around 5... Read more

Dear Green Gurus,

I both regret and am excited to tell you that I am leaving this group to pursue my next adventure.  I'm stepping down as Kirksey's Director of Sustainability, moving to Tucson, and starting my own business.  My business plan is to buy existing buildings, renovate them to net zero, and then sell or rent them.

I... Read more

For those who are visiting Chicago, Kira Gould has asked me to spread the word about a casual AIA COTE meet-up. Stop by, meet friends and have a beer.

If you will be in Chicago on November 15, please consider joining a casual meet-up of COTE leaders/members/friends (no fee to join; it's pay-your-own-way at the pub):  

AIA COTE... Read more

The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more

On our Contractor Coffee talk a few weeks ago, Emi LaFountain (Turner Construction) brought up the idea that there was a lot of blue stain wood that are being landfilled instead of used, and suggested that maybe the designers among us could find a way to turn ugly into beautiful.

I had never heard of this issue, but I was on a call the... Read more

Help regarding below...

OSHA, see below link, suggests 6' social distancing for unvaccinated or at-risk workers.

https://www.osha.gov/coronavirus/safework#role-employers-workers

Is your office going to maintain 6' social distancing for your workers?   Is the reason above because there are unvaccinated or at-risk workers?... Read more