Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

We are coordinating an effort to produce a "Building Reuse Practice Guide for Climate Action" for the AIA.  This is intended as a resource for architects working on major renovations and adaptive reuse, with a focus on reducing energy use, lower embodied carbon, electrification, and adapting to a changing climate. We are looking for around 5... Read more

Hello, All!  I'm hoping for your help to keep a green roof on a project of ours.  We have a large healthcare project in the Midwest that is coming in over budget.  To avoid losing our extensive green roof, I'm looking for alternate sources of funding - grants, private sources, etc.  Has anyone gone down this path before and have shareable... Read more

All,

Some of my colleagues and I have been working to promote interest in mass timber construction for K-12 builidngs.  As part of that effort we redesigned a large high school using mass timber in lieu steel, and conducted a whole building life cycel assessment to measure the reduction in embodied carbon.  We also conducted a program-... Read more

Hello SDLs!

Here is the 2018 SDL Summer Summit Report, ENJOY!

In a couple of weeks we will share this report with the broader Green Gurus group. 

We are also working on setting up a webinar to present the 2018 SDL Summer Summit Report and discuss the Summit!

All the best,

RoseAnn

Hi all,

We are looking to study Passive House on a couple small multifamily projects. Our understanding is that WUFI Passive only integrates with SketchUp at this time. Our BIM manager has been trying to find an example of a firm that works in Revit and uses WUFI Passive, to point him in the right direction on workflow. I offered to ask... Read more

Hi all,

I'm curious if anyone has insight as to the "New Federal Building Performance Standards" that were announced in May of 2021 and then referenced again when E.O. 14057 came out. The memorandum for heads of agencies that was sent out with E.O. 14057 said that the CEQ would issue these standards, but I can't find a commitment to when... Read more

Welcome to the quiz portion of Driving to Green Buildings: The Transportation Energy Intensity of Buildings​​!

Learning Objectives
Upon completing this course, participants will be able to:


Define “transportation energy intensity” as it relates to buildings and understand its impacts on the environment, human health, and... Read more

Join our free Coffee Talk with Alex Spilger to discuss the latest WELL AP v2 exam. Hear what's new in this latest version, what to look for, and what to remember.

Alex combed the WELL Building Standard reference materials and took the v2 exam in writing an extensive exam prep guide.  Hear about... Read more

Charlotte has been the lead customer service representative at BuildingGreen for 25 years. 

Having been involved in the nuts and bolts of customer service and accounting throughout various phases of the company’s development, Charlotte’s historical knowledge is immensely helpful to BuildingGreen’s staff and customers. Customers know her... Read more

My name is Douglas Flandro. I am the sustainable design leader at CambridgeSeven in Cambridge, MA. I started my career in film and theater design. I moved into museum exhibit design with a graduate degree in interior architecture at the Rhode Island School of Design in 2003. I still design museum exhibits for science museums, nature visitor... Read more

Hey group,

I'm part of the contractor team on a large commercial project pursuing LBC v3.1 Petal Certification, with one of those petals being materials. This requires the team to meet Imperative 10 Red List.

The ownership group has taken the responsibility of red list vetting as a task of their own. The construction team is to... Read more

I'm working with a project team that is looking into bird control options to prevent nesting/roosting/pooping on the scrim that is designed to scrim their building's facade.  They are looking at electrified tape, repellents, laser systems, etc -- Options that don't dramatically impact the building design.  The products they're looking at claim... Read more

Hello everyone!

My role at Sundt Construction is both a Preconstruction Project Manager, and Chairman of the company's sustainability committee. I've been involved in green building since 2001 and have been in leadership roles in both the Arizona and Minnesota USGBC Chapters. I look forward to being an active member of this group.... Read more

Hi friends,

We recently tracked our water consumption on site during the structural demolition of some existing reinforced concrete buildings.  The new OSHA silica regulations required us to keep dust to virtually zero, so we had a bunch of mist cannons and water hoses pumping water around the clock.  We consumed ~855,000 gallons in a... Read more

Welcome to the quiz portion of What’s New in Multi-Attribute Environmental Certifications.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe several styles of multi-attribute certification.
2. List a benefit and a downside to both point-based certification programs and... Read more

HI Green Gurus. Great news for those who signed the petition to WHO last summer, and even those who didn't. The World Health Organization’s (WHO) released on March 1, 2021 a Roadmap to improve and ensure good indoor ventilation in the context of COVID-19. This document provides practical advice on how to mitigate COVID-19 through airborne... Read more

Hello fellow sustainable design leaders! I am about to kick off an intensive effort here at EHDD to refine our internal standards for materials. We will be considering both GWP as well as the health of materials (avoiding harmful chemicals). In addition to setting the standards, I will be working to develop a process to vet materials before... Read more