Welcome to the quiz portion of LEDs: The Future is Here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate the energy efficiency and long service life of LEDs.
2. Describe basic LED components and how, when assembled, they perform differently than traditional light... Read more

As many of you may already be aware, Greenbuild 2020 is scheduled for the week of the Presidential Election, Nov. 3rd, 2020. 

The partners organizing Greenbuild 2020 are USGSBC and Informa Exhibitions. If you have concerns regarding Greenbuild happening during that week, you may want to consider reaching out to whoever you have contact... Read more

Hi everyone!

If you will be attending Greenbuild 2023 or live in the DC area, please join us for a Show & Tell!

When: Tuesday September 26, 6:30-9pm ET

Where: Perkins Eastman, 1 Thomas Cir NW #200, Washington, DC, 20005

Please sign up here to present/attend. Beverages and refreshments will be served. We look... Read more

This question of what equity looks like in project design is one I have been musing on for a while now, and I was excited that several of us were able to talk about it at the SDL Summer Summit earlier this month.  That conversation has prompted me to post here, asking what all of you think equity looks like in project design... with a few... Read more

Hi All,

In case you haven't been following State news lately, Massachusetts has a pretty major climate bill on the Governor's desk right now.  He has through tomorrow to either sign or veto it.  There's a ton of support from the bill from advocate groups.  MA AIA and the BSA both wrote letters to the Governor in support.  This only... Read more

Hi folks, I was asking around during Greenbuild and getting a variety of answers on this, and since our Contractor Commitments make a distinction between "GC's" mobile equipment as scope 1 and "Sub's" mobile equipment as scope 3. I know that many of us acting as "CM" claim full "operational control" of a jobsite and consider all fuel using on... Read more

Hi All,

I am looking for a lifecycle analysis consultant to work on a feasibility study in New York. They should have capacity to analyze and compare various architectural, structural and mechanical components for environmental impacts, primarily GHG emissions. Any recommendations are greatly appreciated.

_Ilana

Hi Sages,

Thanks to those who filled out the survey and helped set our agenda for Monday's meeting. We know that this time doesn't work for everyone (no time could, of course), so we'll be alternating times each month. The April meeting will be Thursday, 4/11 at 3:00 eastern.

The agenda is here. It also has the Zoom link (in case... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Dear SD Leader Community: I'm excited to announce the 2021 Steedman Research Fellowship that provides $75K for international travel for recent architectural grads (within 8 years.) I have the honor of serving as this year's jury chair with a fantastic jur. The topic is "Disruption" (seems most appropriate.)

More details here: https://... Read more

I looked through the forums and was surprised to see that from what I can tell this 2018 article from Yale I'm going to share here has not been discussed previously.  It basically says that FSC is not trustworthy, ineffective, and greenwashed, as critiqued by the likes of Greenpeace and others.

I would like to hear from someone in the... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Whole-building life-cycle assessment (WBLCA) can help project teams reduce embodied carbon as well as many other environmental impacts of building materials. And it’s incentivized in LEED and... Read more

For those of you that attended Greenbuild this year you may have heard about the Legacy project taken on by the USGBCMA Chapter. The winning project was The Green Building Tech Club at Madison Park Technical Vocational High School. The USGBCMA Chapter recently reached out to me and asked if Structure Tone would take on an intern this summer,... Read more

Charlotte has been the lead customer service representative at BuildingGreen for 25 years. 

Having been involved in the nuts and bolts of customer service and accounting throughout various phases of the company’s development, Charlotte’s historical knowledge is immensely helpful to BuildingGreen’s staff and customers. Customers know her... Read more

Is this EDI, or JEDI? (Justice, Equity...)

Notes (attached) and Guiding Questions:

Equity, Diversity, And Inclusion In Our Firms

What are the barriers and what’s working to cut through them?

The process is so super slow... how to to celebrate our small achievements?

How are we fostering inclusion and... Read more

Hi SDL'ers, as promised I am sending information about how to support getting flame retardants out of foam insulation. I am attaching a draft letter to Foam Manufacturers, an intro to that letter giving some background and a list of From manufacturers.   Thanks, please contact if you have any questions.   Larry Strain, Siegel & Strain... Read more